Flush-Mount Installation; Disassembling From Bracket - Raymarine FishFinder L265 Instruction Manual

Raymarine l265 fishfinder: user guide
Table of Contents

Advertisement

4.
Drill the two small holes for the threaded studs as shown on the
mounting template. Use a 7/32" (5.5 mm) drill bit.
5.
Remove the template and draw straight lines between the 1/2" holes.
Cut along each of the lines with a small saw.
Installation
Gasket
Mounting hole
cut according to
template
Screw holes
Fasten with
threaded studs
and wing nuts
To pry up the cap
insert a small
Fig. 2-12
screwdriver here
Disassembling
from Bracket
Fig. 2-11
Flush-mount
Installation
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents