Basic Installation; Installation Accessories - Raymarine Autohelm 2000 User Manual

BASIC INSTALLATION

the Aulohelm 2000 can usually be
mounled drreclly onto the Starboard
TILLER PIN (Cal No. 0001)
l Drill 6mm hole x 25mm (1")
deep al porn1 marked.
l Using a Iwo parl epoxy adhesive such
as Araldile, bond the tiller pin into
place.
l Position Ihe shoulder 01 Ihe pin
MOUNTING SOCKET
(Ca! No. D602)
hole x 25rnrn (1")
deep inlo Ihe starboard cockpil seal.
SOCKET
II Ihe slruclure thickness al Ihe
surface wilh a plywood plale bonded
into position.
Note The aulopilol is capable 01
generating high pushrod loads. Ensure
l The epoxy is allowed to harden
before applying any loads;
l Ail holes are drilled to correcl size and
where necessary reinlorcing is
provrded.
INSTALLATION
ACCESSORIES
II il is not possible lo inslall Ihe drive unil
directly onto Ihe cockpil seal or tiller as
described, one 01 the lollowing
accessories (or combinalion) will ensure
a perfect inslallalion.
Dimension C
. __
622mm (24.5") Sld Dimension'
646mm (25.5") 25mm (1")
673mm (26.5") 51 mm (2")
699mm (27.5")
76mm (3")
724mm (26.5")
(29.5;;) -- 127mm (5")
775rnm (30.5")
.
The prrshrod lengllr
exlended using one 01 Ilre slandard
exlensions. Drrnension C
Cat No.
. .._._.
--
IS