Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

Cooper Lighting Metalux VT3-132 Specification

Cooper lighting industrial lamp specification sheet.

 
DESCRIPTION
The VT3 Series is a contemporary looking energy efficient industrial
Vaportite fixture that features rugged and durable construction. The VT3
incorporates a full metal clear tray inside a reinforced fiberglass housing
with a high impact diffuser. This Vaportite series is suitable for interior and
exterior applications and can be surface or chain mounted.
The VT3 Series has been designed for maximum operation in commercial
institutional and industrial environments where weathering, high
temperature, humidity and dust or corrosive fumes are present.
SPECIFICATION FEATURES
A ... Construction
Fiberglass housing is reinforced
polyester and self-extinguishing
(ASTM-D635-74) plastic of a
permanent pearl gray color. Top of
housing has five embossments (2'
unit), nine embossments (4' unit)
and thirteen embossments (8'
unit), providing mounting flexibi-
lity on uneven surfaces. A watertite
hub for 1/2" conduit entry is
provided at each end of housing
(standard) for continuous feed.
Polyurethane gasketing is formed
in the housing providing a
continuous seamless seal for the
diffuser. Six sturdy cam latches
clamp diffuser tightly for a positive
seal between housing, gasketing
and diffuser.
MOUNTING DATA
41-1/2" [1054mm]
Optional Back Hub
Locations
38-3/4" [984mm]
1/4" x 28" Stud
(2 Places)
6-5/8"
[168mm]
X=5-3/8"
X
[137mm]
Y=4-3/16"
49-13/16" [1265mm]
[107mm]
INSTALLATION DATA
MOUNTING
OPTIONAL CHAIN HANGING SET
BRACKETS
(VT2-CHAIN/SET-U)
Furnished
Includes 6 ft. of chain, 4 large
Two per
S-Hooks and 4 small S-Hooks
4' Unit
Order One (1) Kit for each 4' Fixture
Four per
Two (2) Kits Recommended For
8' Unit
8' Fixture
COOPER LIGHTING - METALUX
B ... Electrical*
Unit has full metal gear tray
secured by internal fasteners and
tethers providing maximum
protection and rigidity. Ballasts are
CBM/ETL Class "P" certified
suitable to 70°F. (Cold temperature
ballasts are available for less than
0°F starting with EHT (T5HO only),
EB/PLUS and ER/PLUS Ballasts).
Rotor lock lampholders. Electrical
components and fixtures are
UL/CUL listed for Wet Locations.**
IP65 approved with optional IP67
rating (4' only) with 8 latches.
A
B
6-15/16"
[177mm]
LAMP CONFIGURATIONS
4-13/16"
[123mm]
X=1-13/32"
Y
4-13/16"
[123mm]
X=1-13/32"
Relative Light Output Factors
To accurately predict how luminaires will perform in cold temperatures,
Cooper Lighting individually tested each configuration in the different
ambient environments. The relative light output factor should be
applied as an additional light loss factor component.
VT3 Series
-15°F (-26°C) 0°F (-18°C)
VT3-232
VT3-254
0.73
VT3-332
VT3-354
0.91
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
Catalog #
Project
Comments
Prepared by
C ... Shielding
New contemporary styled lens
clear acrylic w/impact resistant
additives and linear prisms.
"DR" - Clear low brightness pattern
acrylic with 15% high impact
additive.
"DR-100" - Clear low brightness
pattern acrylic with 100% high
impact additive. Example:
VT3-232DR-100
C
4-13/16"
[123mm]
X
X
4-13/16"
[123mm]
X=1-13/32"
6-15/16"
[36mm]
[36mm]
[177mm]
Y=2-1/2"
[64mm]
X
Y
[36mm]
6-15/16"
Y=2-1/2"
[177mm]
[64mm]
20°F (-6°C)
33°F (0°C)
0.67
0.97
0.76
0.86
0.90
0.96
0.98
0.93
E N E R G Y D ATA
Input Watts:
Y
EB Ballast & STD Lamps
6-15/16"
[177mm]
132 (30)
232 (61)
154T5 (54)
254T5 (106)
Luminaire Efficacy Rating
LER = FI-73
Catalog Number: VT3-232DR
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $3.29
*Reference the lamp/ballast data in the
Technical Section for specific lamp/ballast
requirements.
**Not Suitable for Wet Locations if EL4
Option is added. Consult Pre Sales
Technical Support.
50°F (10°C)
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS
0.99
0.94
0.98
Safe and convenient means of
disconnecting power
10/06/2008 11:40:01 AM
®
Type
Date
VT3
132
232
332
154T5
254T5
4' INDUSTRIAL
1, 2 OR 3 LAMP
Vaportite Industrial
ADF071376

Summary of Contents

  • Page 1

    Relative Light Output Factors To accurately predict how luminaires will perform in cold temperatures, Cooper Lighting individually tested each configuration in the different ambient environments. The relative light output factor should be applied as an additional light loss factor component.

  • Page 2

    Top Hub required when stem mounting. For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information. Specifications and Dimensions subject to change without notice.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: