Digital Input; Dynamic Bass Amplified System; Fine Setting Of The Components; Input Signal Setting - RCA RT2380 User Manual

B_RT2380 EN 4/7/04 1:44 PM
Dynamic Bass Amplified System (dBas)
With "Dynamic Bass Amplified System" (dBas), the
discrete amplifier is located in the receiver so the
subwoofer keeps the power needed to reproduce
powerful effects.
4 settings are available: SOFT, BALANCED, STRONG and
POWERFUL.
Press the SUBWOOFER button to toggle the subwoofer
(dBas) effects level according to your needs.

Fine Setting of the Components

The receiver can be directly turned on by pressing the
DVD•6CH / SAT•CABLE / TV / CD•TAPE / VCR / TUNER
buttons on the remote control, which also selects the
best surround sound mode. The default surround modes
for different components are listed in the table below.
If you decide to change the surround mode, you can
press the SURROUND button repeatedly to toggle
among the different surround mode choices and select
the one you want.
DOLBY PL II MUSIC => DOLBY PL EMULATION => 3
STEREO => ARENA => JAZZ CLUB => THEATER =>
STADIUM => DISCO => STEREO => DOLBY PL II MOVIE
Source/ If Digital Input (optical
Input or coaxial) is selected
DVD Dolby Digital
SAT Dolby Digital
VCR N/A
TV Dolby Digital
CD STEREO
TAPE N/A
TUNER N/A
The receiver will keep the last selection in memory.
NOTE
If linear PCM source (CD), format will be Dolby
Prologic even with Digital Input.
Page 23
If Analog Input
is selected
PRO LOGIC
PRO LOGIC
PRO LOGIC
PRO LOGIC
STEREO
STEREO
STEREO
Advanced Sound Control

Input Signal Setting

The receiver defaults to the most convenient settings for
your easiest use (see table).
If your connection is different from the default setting,
1. Select the source
2. Press the SETUP button to show setup options.
3. Press the Left or Right adjustment buttons until
ANALOG is displayed.
4. Press the Up or Down arrow buttons to select among
optical/ coaxial/ analog to match your connection.
Your selection will be stored automatically.
The selected source and input source will be displayed
on the display as long as they are active, except for
some temporary change of display (e.g. adjusting
volume).

Digital Input

Select this setting to play digital signals from a DVD, CD,
LD player, SAT or TV.
SOURCE DEFAULT INPUT (as seen on display)
SAT Analog (SAT/ ANL)
DVD
Analog (DVD/ ANL)
CD
Analog (CD/ ANL)
VCR Analog (VCR/ ANL)
FM/AM Built-in Tuner
TAPE Analog (TAPE/ ANL)
TV Analog (TV / ANL)
NOTE
Digital input is only available for DVD, SAT, CD
and TV
Analog Input
Select this setting to play analog signals from a cassette
deck, VCR or turntable.
SOURCE AVAILABLE INPUT
SAT Analog / Optical / Coaxial
DVD Analog / Optical / Coaxial
CD Analog / Optical / Coaxial
Analog / - / -
VCR
Analog / - / -
TAPE
Analog / Optical / -
TV
EN
19