Advertisement
Quick Links
User Manual
Weatherproof Color Camera
for Indoor and Outdoor Use
CONNECT TO A TV OR
MONITOR:
For more information on which cable to use for your application, please see the extended chart at www.q-see.com/cableselection To purchase, order online at www.Q-SeeStore.com
A single camera can be connected directly to a
monitor or TV using the included cable and adapter.
Connect the camera to the cable and power supply as
described in Steps 1, 2 and 5 above before connecting it to
your video display.
CAMERA
TV or MONITOR
For TV: Tune to correct INPUT (ie; A/V, L1, L2,
Source) Consult TV manual for details.
Depending on your TV or monitor, you may
need to use the included BNC-to-RCA adapter
(below) to connect the yellow plug on the
camera cable to your screen.
PRECAUTIONS:
TO CONNECT TO A SECURITY DVR SYSTEM:
CAUTION! Risk of electrical shock. To prevent electric
STEP 1
shock, do not remove screws or cover.
end of the power and video cable.
Do not attempt to disassemble camera. There are
no user serviceable parts inside. Service should be
performed by a qualified Q-See technician only.
Handle camera with care. Do not hit, shake, puncture
or drop the camera as this could cause damage and
prevent proper operation.
Avoid strong light. Do not aim camera at sun or aim
IMPORTANT!
strong light directly into the lens as it will degrade image
between the camera and the DVR, the "male" power end (red plug)
quality and could cause damage. Camera should ideally
connects to the matching power lead on the camera.
be placed out of direct sunlight for improved performance.
STEP 2
Protect from elements. These cameras are
weatherproof but direct exposure to excessive rain, sun
or marine environmental conditions will degrade their
cable to the power splitter.
performance and shorten the life of the product.
For single camera packages, connect the power lead
Avoid excessive moisture within camera or
into the power adapter itself. In this case, you can skip to
adapters. Do not use strong or abrasive detergents
Step 4.
when cleaning camera body. Clean with dry cloth or mild
detergent, wiping gently.
Do not use camera beyond prescribed voltage range.
Only use included power supply. Ensure power input
source conforms to local voltage. Voltage outside of
range could cause damage or abnormal performance.
EXTENSION CABLES:
QS60F (60')
Q-See Model Number
QS120F (120')
Maximum Run Length
180'
Quality Output
Standard
Type
75Ω Video Cable
Shielded
No
Plenum Rated
No
Pre-Attached Connector
Video
RCA
Audio
RCA
Power
2.1mm
Usage
Indoor/Outdoor · Do not run inside walls or underground
Camera Compatibility
To maintain video quality:
· Video quality is always enhanced by using shielded cables.
· Always check state and local laws before installing cameras. (2011 NEC 820.44)
· To prevent video signal loss, run one continuous cable between the camera and DVR for best results. If more length is
required, use the minimum number of inter-connection points possible.
STEP 3
Connect the BNC and power leads from the
camera to the matching connectors on one
CAMERA
When connecting the power and video cable
For multi-camera packs, connect the
power connector on the other end of the
enough voltage to operate multiple cameras.
Connecting a single camera to the adapter can
cause the optical chipset of that camera to burn
out and become useless.
QSVRG60 (60')
QS50B (50')
QS59500 (500')
QSVRG100 (100')
QS100B (100')
QS591000 (1000')
QSVRG200 (200')
180'
800'
Standard
High
75Ω Video Cable
RG-59
No
Yes - UL Rated
No
No
BNC
BNC
N/A
N/A
2.1mm
2.1mm
Indoor/Outdoor · In-wall or along wall
CMOS/CCD, RCA/BNC Connection
STEP 4
Plug the power splitter cable into the
camera power adapter. DO NOT plug the
Connect the BNC connector
adapter into an outlet at this time.
on the other end of the
power and video cable to a
Video In port on the back
of the DVR.
Repeat Steps 1 through 4 for all cameras
before continuing.
STEP 5
WARNING!
If you have a multi-
camera package, the included
power adapter is designed to provide
*When selecting a surge protector, it is STRONGLY
recommended to use one that is UL-1449 rated, for a
clamping voltage of 330 or lower, a Joule rating of at least
400 and a response time of 10 nanoseconds or less.
LEGAL:
Trademarks: All brand names and products are trademarks
or registered trademarks of their respective owners.
Q-See is a registered trademark of DPS, Inc.
Other Notes:
Disclaimer: The information in this document is subject
to change without notice. The manufacturer makes no
· If a cable run exceeds 800ft,
representations or warranties, either express or implied, of any
we recommend using RG-6
800'
kind with respect to completeness of its contents.
coaxial cable which is available
High
at most retail building supply
Manufacture shall not be liable for any damages whatsoever
companies.
from misuse of this product.
RG-59
· If your home or business
Yes - UL Rated
is pre-wired with CAT-5
DISPOSAL:
No
cable, then you can run up
to 1000ft. (QSBAL2 Video
If the camera no longer functions or can no longer
BNC
Balun or Powered Balun
be repaired, it must be disposed of according
N/A
are recommended for easy
to regulations regarding electronic waste. By
installation.
not disposing of electronic items in household
2.1mm
waste you will not only be following the law, but
contributing to the protection of the environment.
Digital Peripheral Solutions, Inc.
8015 E. Crystal Dr., Anaheim, CA 92807
1-877-998-3440 • www.q-see.com
Q-See Customer Support (USA)
FAQ, videos, guides 24/7 & live chat (M-F 9-5pm PST)
at www.q-see.com • e-mail: support@dpsi-usa.com
AUDIO IN
VIDEO IN
1
3
1
3
2
4
2
4
Plug the power adapter into a surge
protector *
Advertisement
