Planar Dome C2 Quick Reference Manual

Windows xp windows 2000
Hide thumbs Also See for Dome C2:

Advertisement

Quick Links

Dome CX Displays
Dome DX/DX2 Display Controller
Dome CXtra Software
QUICK REFERENCE
Windows XP
Windows 2000

Advertisement

Table of Contents
loading

Summary of Contents for Planar Dome C2

  • Page 1 Dome CX Displays Dome DX/DX2 Display Controller Dome CXtra Software QUICK REFERENCE Windows XP Windows 2000...
  • Page 2: Before You Begin

    Before You Begin This quick reference provides instructions for installation of the Dome C2, C3, C3i, or C5i display system. Note that the location of the DIP switch differs on the DX and DX2 display controllers, but both boards have identical instructions for installation and are supported by the same driver.
  • Page 3: Unpacking The Display

    Unpacking the Display Check the contents of your Dome CX display package for all the items shown here. Save the original packing materials for storage and shipping. Dome CX digital flat panel CX power block Power cord DVI-to-DVI video cable Dome display controller Dome CX and Dome CXtra quick references...
  • Page 4 Setting DIP Switch S2 For either the DX or DX2 DIP Switch S2 Enable VGA Disable VGA display controller, slide switch 1 on DIP switch S2 into the ON position to enable VGA mode. Enable VGA on only one (1) board when you install multiple boards.
  • Page 5: Installing The Display Controller

    Installing the Display Controller Turn your computer off. Leave the power cord plugged into the grounded outlet. To install the controller Turn off all peripherals. Disconnect all cables from the back of your computer. Remove the computer cover. Remove the blank bracket from the available PCI slot.
  • Page 6 Identifying Controls and Connectors Connector plate Locate your specific CX display to the right USB ports on desktop stand Interpreting LED Status Lights LED A indicates the digital-link status between the display controller and the interface. LED B indicates the display-panel status;...
  • Page 7 Specific Connector Plates Reset LEDs Reset LEDs Reset LEDs C3i/C5i Power DVI B DVI A Power Power...
  • Page 8 Connecting the Board, Display, and Power Supply Use only the cable and power cord supplied with the Dome CX display. Press the PUSH button on the desk stand cover and remove the stand cover. See page 9 for how to thread the cable and cord on the desk stand.
  • Page 9 Threading the DVI Cable and Power Cord To remove the stand cover, press the PUSH button on the desk stand (just above the USB hub) and pull the stand cover down and out to remove it. Thread the DVI cable and the power cord through the back of the stand.
  • Page 10 Installing the Display Driver on Windows XP/2000 If necessary, remove the previously installed 63-WINDX driver before you install the 63-W2KDXPCI driver. To remove the 63-WINDX driver Log on with administrator privileges. Insert the WINDX CD. Open the CD folder. Browse to the Win2k directory. Double-click Setup.exe.
  • Page 11 Select Yes, I want to restart my computer now, and click Finish. To enable display Log on with administrator privileges. Right-click the desktop. Select Properties > Settings. Select the display icon. Select Extend my Windows desktop onto this monitor. Click Apply. Click OK.
  • Page 12 Log on with administrator privileges. Right-click the desktop. Select Properties > Settings. Select Default Monitor and DOME DX/PCI Properties. Activate Extend my Windows desktop onto this monitor. Select Advanced > DOME. Choose a resolution. Click Apply. Click OK until you return to the desktop.
  • Page 13 Dome CX Display Resolutions and Palette Options Dome CX display Resolution available Palette available C3/C3i gray C3 color * Single desktop in portrait mode on a dual-display system † Single desktop in landscape mode on a dual-display system 1200 x 1600 Dynamic gray 1600 x 1200 Nonlinear gray...
  • Page 14 Using Dome CXtra Through value-added services, the Dome CXtra monitoring and calibration software enhances the functionality of Dome CX displays. All Dome CX displays ship with the CX Edition Base Package. The CX Edition Validation Package is sold separately. CX Edition Base Package •...
  • Page 15: Cleaning The Lcd Screen

    Cleaning the LCD Screen Do not use or spray liquid, aerosol, ammonia, or other alcohol-based cleaners on the display or screen. Some chemical cleaners may damage the display and its case. Unplug the power supply before cleaning the display. Dampen a soft, clean cloth with water or a mild cleanser.
  • Page 16: Customer Support

    E-mail medicalsupport@planar.com • Call (866) PLANAR1 Copyright © 2004 Planar Systems, Inc. Planar, Dome, CXtra, RightLight, and QuickSwitch are either registered trademarks or trademarks of Planar Systems, Inc. Technical information in this document is subject to change without notice. 020-0361-00A...

Table of Contents