Pico Macom MOR-PSH Specifications

Headend & Electronics
Saves money on costly electrical
system upgrades by reducing
the number of electrical
receptacles required
Reduces wiring clutter by
enabling simple power cable
routing of up to 10 or 22
components
Eliminates current build up
associated with daisy-chaining
power through components,
improving reliability
15A Circuit breaker and/or
400V surge suppression pro-
tects equipment from harmful
spikes and overload
Illuminated On/Off switch
provides quick identification
of power status
Sturdy metal housing mounts
easily to equipment racks, pro-
duction carts, raceways and
workbenches
Long electrical cords simplify
installation
UL compliant UR approved
www.picomacom.com
Rack Mount Power Distribution Strips
MOR-PSH
MOR-PSV
MOR-PS
Rack Mount Power Distribution Strips
The Pico Macom MOR-PS series rack mount power distribution strips are heavy-duty
commercial grade multi-outlet power strips that enable installation of up to 10 or 22
110V powered units into a single power receptacle. The fully enclosed metal housing
provides safe distribution of power to components while reducing the clutter and com-
plications of multiple power sources. The MOR-PS series provides a single source for
electrical current, reducing ground loops and the modulation of 60-cycle hum in elec-
tronic components. The MOR-PSH provides total circuit protection of 15A 125V provided
through the reset-able circuit breaker. The MOR-PSV is enhanced with the addition of
a voltage clamped surge protection of 400V. The provided mounting hardware allows
these units to easily mount to equipment racks, production carts, raceways and work-
benches, making them essential in any properly built headend system.
PICO MACOM, INC.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
MOR-PS
Series
Series
1363
355 A-??
Parkside
Rev. 06/02