Pico Macom HFS-2/2150 Specifications

DISTRIBUTION
Passive Components
High frequency broadband range
950-2150MHz L-Band suitable for
analog and digital satellite applica-
tions
HFS2150-series provide DC power
passage to one port while blocking
DC power to all other ports for
improved hum modulation and
Intermodulation performance
HFSP-2150-series provide DC
power passage to all ports provides
for remote LNB-powering applica-
tions and powering the antenna
preamplifier directly from the
headend
High-performance printed board
circuitry provides improved hum
modulation and intermodulation
parameters to ensure superior
signal quality
Yellow-chromate plated zinc-alloy
diecast housing ensures excellent
ground bonding and long corrosion-
free service life in indoor/outdoor
applications
Epoxy-sealed back cover provides
effective EMI-RFI shielding >-70dB
eliminating signal ingress to provide
distortion free pictures
1-inch centered 3 / ˝ long precision
8
machined F-connector threads
ensure improved port-to-connector
interface and accommodate
external security devices
Internal seizing pins provide
improved connectivity to connector
center lead
2-port versions feature cast-in
mounting-tabs and ground block
with provided mounting screws to
enable easy and cost-effective
installations
www.picomacom.com
HFS2150
2150MHz 90dB EMI Satellite Splitters
HFS-2/2150
HFS-2P/2150
HFS2150
2150MHz 90dB EMI Satellite Splitters
TruSpec's HFS-series professional-grade high frequency satellite splitters are
manufactured to precise specifications to provide low insertion loss, high isolation
and return loss performance. HFS-series are ideally suited for headends where
satellite signals are split to multiple receivers and used in both 950-1450 MHz
satellite distribution systems and stacked polarity 950-2150MHz satellite systems.
DC power can be passed from input and to a single output (HFS-series), or can
be passed through all ports (HFS-P series) for total flexibility in remote LNB pow-
ering applications. Advanced printed board circuitry ensures high-quality analog
or digital signal transfer. F-port threads are precision machined, ensuring easy
connector installation and removal, and improved port-to-connector interface.
Internal seizing pins ensure excellent connectivity to connector center lead. The
zinc-alloy cast case and epoxy sealed back plate provide superior RFI shielding
(-90dB) and a full environmental seal. Each HFS splitter is individually tested at
the factory to comply with precise quality standards.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
Series
HFS-4/2150
HFS-4P/2150
Series
C-9
Rev. 12/02