Download Print this page

Pico Macom DSU-2P Specifications

Dsu series 1ghz 70db emi matv splitters

Advertisement

Quick Links

DISTRIBUTION
Passive Components
Broadband 5-1000MHz fre-
quency range
DC power-passing on all ports
provides for remote powering
applications and powering
antenna preamplifier directly
from the headend
High-performance printed
board circuitry provides
improved hum modulation and
intermodulation parameters to
ensure superior signal quality
Yellow-chromate plated zinc-
alloy diecast housing ensures
excellent ground bonding and
long corrosion-free service life
in indoor/outdoor applications
Epoxy-sealed back cover pro-
vides effective EMI-RFI shield-
ing >-70dB eliminating signal
ingress to provide distortion
free pictures
1-inch centered
3
/
˝ long preci-
8
sion machined F-connector
threads ensure improved port-
to-connector interface and
accommodate external securi-
ty devices
High retention internal seizing
pins provide improved connec-
tivity to connector center lead
Cast-in mounting-tab and
ground block with provided
mounting screws enables easy
installation
Performance tests conducted
conforming with SCTE stan-
dards IPS TP-201, 202, 203, 406
www.picomacom.com
DSU-2P
DSU
Series
1GHz 70dB EMI MATV Splitters
Manufactured to high performance standards, TruSpec's DSU-series 1GHz
professional-grade MATV splitters provide excellent performance at low costs,
rivaling competitors' equivalent models. Applications range from residential to
MDU installations in international and domestic cable distribution systems. Our
advanced printed board circuitry includes special ferrite core material guar-
anteeing minimal insertion loss, optimal isolation and return loss to 1GHz
ensuring high-quality signal transfer. DSU series F-port threads are precision
machined, ensuring easy connector installation and removal, and improved
port-to-connector interface. The zinc-alloy cast case and epoxy sealed back
plate provide superior RFI shielding (-70dB) and a full environmental seal.
Each DSU splitter is individually tested at the factory to comply with precise
quality standards.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
DSU
1GHz 70dB EMI MATV Splitters
DSU-4P
Series
MS-2D
DSU-3P
DSU-8P
C-5
Rev. 12/02

Advertisement

loading

Summary of Contents for Pico Macom DSU-2P

  • Page 1 1GHz 70dB EMI MATV Splitters Manufactured to high performance standards, TruSpec’s DSU-series 1GHz professional-grade MATV splitters provide excellent performance at low costs, rivaling competitors’ equivalent models. Applications range from residential to MDU installations in international and domestic cable distribution systems. Our...
  • Page 2 Trace C 23dB Typical 28dB Typical 4.4˝(L) x 2.3˝(W) x 1.2˝(H) DSU-8P MS-2D © Copyright 2003 Pico Macom, Inc. Series 1GHz 70dB EMI MATV Splitters SPEC DSU-8P SPEC 5-1000MHz P O W E R P A S S I N G S P L I T T E R...

This manual is also suitable for:

Dsu-4pDsu-3pDsu-8pMs-2d