Download Print this page

Cooper Lighting HALO DE641 Specifications

Cooper lighting track lighting specifications

Advertisement

Quick Links

L 9 4 2
F l e x J o i n e r
To connect two track sections at any angle up
to 90,° in either plane or wall to ceiling or
pitched ceiling applications.
Finish: White (P), Black (MB)
L 9 4 5 R
R i g h t T C o n n e c t o r
"T" connector for joining three trac sections
with right hand polarity. May be used as feed
point.
Finish: White (P), Black (MB)
L 9 4 6
X C o n n e c t o r
To connect four track section into a cross
configuration. May be used for feed point.
Finish: White (P), Black (MB)
L 9 4 9
M i n i J o i n e r
To join two straight track sections end-to-end.
Not a feed point.
Finish: White (P), Black (MB)
L 9 8 3
T- B a r A t t a c h m e n t C l i p
Allows track to be attached to inverted tee
ceiling. Order as follows: 2 kits for 2' Trac; 2
kits for 4' Trac; 3 kits for 8' Trac; and 4 kits for
12' Trac.
L 9 8 6
T- B a r A t t a c h m e n t C l i p
For mounting track on suspended ceilings with
mini-grid (9/16" wide) system.
L 9 2 9
F l o a t i n g C a n o p y a n d
C o n n e c t o r
Can be connected anywhere along length of
Trac. Comes with canopy cover, connector,
dead-end and mounting hardware.
Finish: White (P), Black (MB)
L 9 9 4
4 5 ° P e n d a n t A d a p t e r
For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992 and L993.
Finish: White (P), Black (MB)
HALO
L 9 4 3
S t r a i g h t / L C o n n e c t o r
To connect two track sections end-to-end or at
a 90° angle. May be used as feed point.
Finish: White (P), Black (MB)
L 9 4 5 L
L e f t T C o n n e c t o r
"T" connector for joining three trac sections
with left hand polarity. May be used as feed
point.
Finish: White (P), Black (MB)
L 9 4 7
C o n d u i t C o n n e c t o r
A live end connector for use with surface
conduit. Designed to accept standard 1/2"
conduit fitting (not included). May be used for
feed point.
Finish: White (P), Black (MB)
L 9 5 1
W i r e W a y C o v e r f o r
P e n d a n t A s s e m b l y K i t
For track to be wired through stem (one for
each live end used). Shown with end feed and
pendant stem kit–order separately
Finish: White (P), Black (MB)
L 9 8 9
C o n d u i t C o n t i n u a t i o n K i t
Includes one left and one right feed. To
continue
a run around obstructions with 1/2" trade size
surface conduit.
Finish: White (P), Black (MB)
L 9 9 2
P e n d a n t K i t A s s e m b l y
To suspend track from ceiling. Order as
follows: 2 kits for 2' Trac; 2 kits for 4' Trac; 3
kits for 8' Trac; and 4 kits for 12' Trac. Includes
one 18" threaded steel stem, canopy and
mounting hardware.
Finish: White (P), Black (MB)
L 4 8
4 8 " S t e e l S t e m
For additional length of stem for L992. Can be
field cut and threaded.
D E 6 4 1 D e a d E n d
Replacement Dead Ends for Two Circuit Track
(6 included)
Finish: White (P), Black (MB)
COOPER LIGHTING
®
313

Advertisement

loading

This manual is also suitable for:

Halo l929Halo l942Halo l943Halo l945lHalo l945rHalo l946 ... Show all