Advertisement
Quick Links
Little Ego + Controls and Indicators
1. USB Input
Connect this to a USB port on your
computer or audio player. (This is a
standard mini-USB connector.)
2. Headphone Output
This output provides a high quality audio signal
to drive your headphones when the Output
Selector is set to Analog.
3. Filter Select Button
Press this button once to enter Filter Select
Mode. The LED display will indicate the
currently selected filter. Press the button
repeatedly to cycle through the choices. Once
you reach the choice you want to use stop
pressing the button; your selection will be
entered after a few seconds.
4. Sample Rate LEDs
These LEDs normally display the sample rate
of the incoming audio signal. They switch to
showing the current filter in Filter Select Mode.
5. USB Mode LED
This LED will illuminate red when the Ego + is in
UAC1 compatibility mode.
Advertisement
Related Manuals for Emotiva BIG EGO+
Summary of Contents for Emotiva BIG EGO+
- Page 1 Little Ego + Controls and Indicators 1. USB Input Connect this to a USB port on your computer or audio player. (This is a standard mini-USB connector.) 2. Headphone Output This output provides a high quality audio signal to drive your headphones when the Output Selector is set to Analog.
- Page 2 Big Ego + Controls and Indicators The Emotiva Big Ego + and Little Ego + are precision 24/384k USB audio digital-to-analog converters. This Getting Started guide will give you the basic information you need to connect your Ego + DAC to an audio source and start listening to some high quality music.