Advertisement
Quick Links
DateCodeGenie
Power Setup
1. Connect power cord to back
of the device and to an outlet.
Toggle master power switch to
illuminate green and charge the
touchscreen for 1 hour.
X Series Quick Start Guide
®
models X2, X22, X23, and X33
Parts Included
• Device
• Power cord (inside
• Stylus and Holder (inside
• Packing slip
• Quality testing labels
• Quick Start Guide
Printer Setup
2. Open the case cover to reveal
the printer(s). Gently separate the
two black arms and insert label roll
unrolling from the top with black
lines facing down.
device)
device)
Scan this QR Code
to watch the
setup video
3. Press the blue/black tab to
release the lever. Extend the labels
over the edge of the opening and
close lever to snap in place. Labels
will automatically advance and
cut to calibrate. Repeat for second
printer (if applicable.) Close
case cover.
NC DCG 09 002 (4/21)
Advertisement
Related Manuals for NCCO DateCodeGenie X Series
Summary of Contents for NCCO DateCodeGenie X Series
- Page 1 DateCodeGenie X Series Quick Start Guide ® models X2, X22, X23, and X33 Parts Included • Device • Power cord (inside device) • Stylus and Holder (inside device) Scan this QR Code to watch the • Packing slip setup video •...
- Page 2 Tablet Setup 4. Press and hold tablet power button releasing when 5. Tap Settings to begin device setup. DateCodeGenie displays. ® 6. Tap Network & Internet to connect to network. 7. Tap to turn on Wi-Fi and turn toggle green. Wi-Fi and then the network to connect to from the list.
- Page 3 App Setup 9. Tap DateCodeGenie to launch the app. 10. Tap the to display username list and tap to ® select (see Packing Slip for login credentials). Type in the password, if prompted, and tap 11. Tap ALLOW for DateCodeGenie to access 12.
- Page 4 Technical Support 800.328.6508 800.774.0478 cs@ncco.com dcgsupport@ncco.com NCCO is committed to the quality and reliability of its DateCodeGenie products. For more info and full details of ® the device limited 2-year warranty, log into your portal at DateCodeGenie.com, locate the Support Tab then Documentation to download the full DateCodeGenie Limited Warranty.