Cooper Lighting 477 Specifications

L 1 9 7 3 L o w Vo l t a g e
C a n o p y A d a p t e r
Allows use of L2001 and L2004
Solid State Adapter or
lampholders with integral solid
state transformer in canopy
mount installations. Also for
use with L3218, L3232, L3239,
L5300, L5130 & L5138. Mounts
permanently to junction box.
5 3/8" sq.
Finish: White (P), Black (MB)
L 9 7 2 C C l a m p A d a p t e r
Can be mounted on pipe up to 2"
dia. or any flat protruding surface.
Complete with 6' 3-wire cord with
3-prong grounded plug.
Finish: White (P), Black (MB)
L 9 1 7 S l o p e A d a p t e r s
Allows use of extension wands on
sloped or cathedral ceilings. 0°-90°.
Max Extension: 4 3/4" (121mm)
Finish: White (P), Black (MB)
L 9 5 6 S h o w r o o m F i x t u r e
A d a p t e r
Note: Single Circuit only
Allows canopy mounted fixture
(chandelier, etc.) to be suspended
from track. Will hold up to 35 lbs.
Can be switched on and off via track
or by pull chain on adapter.
Finish: White (P)
L252, L352 Media Holders
Allows use of L400 series color filters and Cube
cell louvers with L1830 (L252) and L1838 (L352)
Media Holder L252MB
Med. Pink filter L411
Warm Red filter L412
Daylight Blue filter L420
Medium Blue filter L421
Medium Amber filter L431
Medium Green filter L441
UV filter L414
Cube Cell L274
Finish: Black (MB)
L 1 9 7 4 W e i g h t e d B a s e
A d a p t e r
For portable use. May also be used
with L2001 and L2004 Adapter and
low voltage lampholders. Padded
base 5 3/8" sq. Complete with 6'
3-wire cord with 3-prong grounded
plug. Rotary on-off switch.
Finish: White (P), Black (MB)
L 9 7 3 C a n o p y A d a p t e r
Mounts permanently to outlet box.
4 1/2" sq. Not for use with electronic
low voltage lampholders, HID
lampholders or ParaTrack
lampholders except for the following:
L2005, L5038, L5300, L3240E, L3250E,
L3255E
Finish: White (P), Black (MB)
L 9 1 8 , L 9 3 6 , L 9 4 8 E x t e n s i o n
W a n d s
For use with most lampholders
(excluding those with integral
electronic transformers, HID
lampholders except L5300 or some
Para Trac [L3218, L3232, L3239]
lampholders) and trac. May also be
used with L2001 Solid State Adapter,
L967 or L968 Switches or, with L963, in
4 Circuit Trac.
NOT FOR USE WITH LAZER TRACK
LAMPHOLDERS
L918-18" length; L936-36" length;
L948-48" length.
Finish: White (P), Black (MB)
4 7 7 Tr a c A d a p t e r Tr i m
For use with Halo H7, H7R and H44
recessed housings. Allows Trac
lampholders to be used with
recessed installations. Not for use
with any solid state/electronic low
voltage, HID lampholders or
fluorescent lampholders. Up to 150W
maximum.
Finish: Black Baffle with White Trim
Ring (P), White Baffle with
White Trim Ring (W)
HALO
L352MB
L211
L212
L220
L221
L231
L241
L214
L275
COOPER LIGHTING
®
325