National Cycle SwitchBlade Deflector UQ01 Installation Manual

Dealers: If installing this windshield for a customer, please give them this manual. It contains information needed to
properly maintain and use this product.
The SwitchBlade Deflector is intended for use with the correct QuickSet 4™ mount kit for your motorcycle. At any time you
may interchange windshields with the 2-Up™ or Shorty™ using the same mount kit.
Attention
Special notes and cautionary measures which
can prevent damage to the accessory or
motorcycle.
Parts List For: Kit UQ01, Kit UQ05, Kit UQ07
Note: Your specific Mount Bracket number is specified
in Index 1 and 2.
The items pre-assembled to the windscreen are prop-
erly tightened using thread lock. Do not adjust.
INDEX PART NO. AND DESCRIPTION
1 37-371931-000 Mount Bracket, Left KIT UQ01
1 37-371935-000 Mount Bracket, Left KIT UQ05
1 37-371937-000 Mount Bracket, Left KIT UQ07
2 37-371932-000 Mount Bracket, Right KIT UQ01
2 37-371936-000 Mount Bracket, Right KIT UQ05
2 37-371938-000 Mount Bracket, Right KIT UQ07
BAG 761 Contained in KIT UQ01, UQ05, UQ07
3 55-586043-000
4 42-482201-000
Preparation
Position the motorcycle securely on its stand or a work stand. Cover
the front fender and fuel tank with a suitable cloth to avoid scratch-
es from dropped tools.
Left and right side of motorcycle and product are
determined while sitting on the bike.
This installation manual covers Kit UQ01, Kit UQ05 and Kit UQ07
QTY.
1
1
1
1
1
1
Bolt, Carriage 5/16"-18 x 5/8" 4
Nut, Hex Cap 5/16 - 18 4
SwitchBlade Deflector™ Windshield
Lexan® polycarbonate with QUANTUM™ Coating
Note:
Tips for facilitation of operation, control and
adjustment, as well as maintenance work.
Figure 1.
Page 1 of 2
All Patents Pending
1, 9/16" Socket
1, Socket Wrench
3 4
2
10-112210-000
1
07/04