GETTING STARTED
(CONTINUED)
INITIAL CHANNEL SEARCH
Before proceeding, please make sure to correctly
hook up your antenna or cable connection and all
AV equipment to your HDTV.
1. PLUG IN AC POWER CORD
120V AC, 60Hz
2. TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial Energy
Saving Mode, and perform an Initial Channel/Signal
Search.
3. TV SET LOCATION SELECTION:
Select “Home Mode” by pressing the CHM key to set
the HDTV’s backlight to an Energy Star qualified
level, or select “Store Mode” by pressing CHL to set
the backlight to a retail display level.
4. CHANNEL AND AV SIGNAL SEARCH:
Press the CHLM key to perform a channel search
from an Antenna or a direct Cable connection,
followed by a signal search from devices hooked up
to the HDTV’s AV input jacks.
5. CHANNEL AND SIGNAL SETUP SCREEN
The final setup screen displays analog and digital
channels found as well as AV inputs detected.
Pressing the CHLM key finalizes the setup process.
NOTE: To repeat the initial setup process press
the MENU key.
Channel and Signal Setup:
Analog Channels...16
Digital Channels...24
Video 1...Yes
HDMI 1...Yes
Video 2...no
HDMI 2...no
Video 3...no
The search was successfully completed!
Press CHannel UP or DOWN to finish the Setup process.
Press MENU to repeat the process.
If you are having problems, call us toll-free at 1-800-877-5032
AV INPUT SELECTION
Press the INPUT key to select the correct AV input for the
video source you wish to watch.
NOTE: Unused AV inputs may be disabled with the Input
Setting feature (see page 10).
Need help?