Winegard Air 360 Plus AR2-360, AR360AM, AR2360C, AR-360K
OMNIDIRECTIONAL HDTV/AM/FM ANTENNA + WIFI + 4G EXTENDER*(AM/FM on select models only)
OPERATION
SCAN
FOR
MORE
PRODUCT
INFORMATION
Winegard Company
2736 Mt. Pleasant St.
NEXTGEN TV is a trademark of Consumer Technology Association. AT&T and the Globe Logo are owned by AT&T Intellectual
Property.Verizon Wireless is a trademark of Verizon Trademark Services, LLC. T-Mobile, the magenta color, and the digits
design are registered and/or unregistered trademarks of Deutsche Telekom AG. All trademarks, registered trademarks and
logos are the property of their respective owners and are not affiliated with Winegard Company.
NEXTGEN TV
Ready
™
(ATSC 3.0)
For help, email help@winegard.com or call 1-800-288-8094
WARRANTY
OR CALL
800-288-8094
|
Burlington, IA
*When paired with compatible
Winegard Gateway (GW-1000 or GW-PRO1)
Run a channel scan to receive maximum
programming.
that have been added in your area, plus find any
channels that have changed or moved since the
last scan. Steps to perform a channel scan vary
between televisions/compatible devices; below are
general guidelines to follow.
1
Ensure the antenna power supply
(wall plate) is in the "ON" position and
the green indicator light is illuminated.
2
Using the television remote, select MENU
and then SETTINGS.
3
Select CHANNEL SETUP.
4
Select ANTENNA or AIR depending on
your TV. Make sure you are not on CABLE.
5
Select CHANNEL SEARCH or CHANNEL
SCAN. Keep in mind that steps to perform a
channel scan may vary. If the wording from
your TV differs from the options shown,
refer to your TV user manual for help.
NOTE: Running a channel scan is NOT the same
as pressing Channel UP/DOWN on your
remote.
TIP: To receive maximum programming and keep
your channel line-up up-to-date, it is a good
idea to run a channel scan monthly, anytime
a channel is lost, and anytime you change
locations.
Printed in U.S.A. © 2022 Winegard Company
Quick Start Guide
A scan will find any new channels
Rev 10-22 2452449