Changing the player settings
Change the unit's settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Press SETUP.
1
Press e r to select the menu, and press q.
2
Press e r to select the item, and press q to
3
confi rm your selection.
Press e r to select the settings, and press
4
OK.
•
To return the previous menu, press w.
To exit, press SETUP.
•
Operation methods other than the above
procedure may be displayed. In that case, follow
the on-screen instructions.
Depending on the type of media, this unit's
settings may be disabled.
SYSTEM
TV System
⇒
This menu contains the options for
selecting the color system that matches the
connected TV.
NTSC
⇒
It will change the video signal of a PAL
contents and output it to NTSC format.
PAL
⇒
It will change the video signal of an
NTSC contents and output it to PAL
format.
PAL60
⇒
It will change the video signal of an
NTSC contents and output it to PAL 60
format.
Auto
⇒
Select this if the connected TV is
compatible with both NTSC and PAL.
Screen Saver
⇒
This setting enables the Screen Saver
to activate. Screen saver will start
automatically if the media playback is
stopped for about 5 minutes.
Video
⇒
This sets the output method of this unit
according to the television to connect.
Resolution (DVD-S68 only)
⇒
Select a video resolution that is compatible
with the TV display capability.
Selecting Auto can automatically select the
best resolution.
HDMI CEC (DVD-S68 only)
⇒
When connecting this unit with the TV via
the HDMI cable, linked operations with a
connected device is possible.
TV Type
⇒
Set the TV Type on the DVD player
according to the TV you have connected.
4:3PS
⇒
16:9 aspect images are enlarged in full
screen with the both sides cut.
4:3LB
⇒
16:9 aspect images are displayed with
black bands on top and bottom.
16:9
⇒
4:3 aspect images are displayed in the
center of the screen.
16:9Full
⇒
4:3 aspect images are stretched to right
and left.
LANGUAGE
OSD
⇒
This switches the language for display
menu.
Audio
⇒
This switches the language for output
audio.
Subtitle
⇒
This switches the language for subtitle.
Menu
⇒
This switches the language for disc menu.
AUDIO
Audio Out (DVD-S68 only)
⇒
This sets the audio output method when
connected to the "HDMI AV OUT" terminal.
Bitstream
⇒
When the connected equipment is
supporting Dolby Digital
PCM
⇒
When the connected equipment is not
supporting Dolby Digital
Dynamic Range
⇒
Adjusts for clarity even when the volume is
low through compressing the range of the
lowest sound level and the highest sound
level.
11