Download Print this page
Panasonic WV-CP254H Operating Instructions
Panasonic WV-CP254H Operating Instructions

Panasonic WV-CP254H Operating Instructions

Color cctv cameras
Hide thumbs Also See for WV-CP254H:

Advertisement

Available languages

Available languages

Quick Links

Color CCTV Cameras
W V
-
C P 2
5 4 H
Operating Instructions
WV-CP254H
Model No.
(Lens: Option)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
N0703-1103
3TR001812BAA
Printed in Japan
For U.S.A
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
CAUTION
protection against harmful interference when the
RISK OF ELECTRIC
equipment is operated in a commercial environ-
SHOCK DO NOT OPEN
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instruction manu-
al, may cause harmful interference to radio com-
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
munications.
DO NOT REMOVE COVER (OR BACK).
Operation of this equipment in a residential area is
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
likely to cause harmful interference in which case
VICING TO QUALIFIED SERVICE PERSONNEL.
the user will be required to correct the interference
at his own expense.
FCC Caution: To assure continued compliance,
The lightning flash with arrowhead
(example - use only shielded interface cables when
symbol, within an equilateral trian-
connecting to computer or peripheral devices). Any
gle, is intended to alert the user to
changes or modifications not expressly approved
the presence of uninsulated "dan-
by the party responsible for compliance could void
gerous voltage" within the product's
the user’s authority to operate this equipment.
enclosure that may be of sufficient
magnitude to constitute a risk of
SA 1965
electric shock to persons.
The serial number of this product may be found on
the top of the unit.
You should note the serial number of this unit in the
The exclamation point within an
space provided and retain this instruction as a per-
equilateral triangle is intended to
manent record of your purchase to aid identification
alert the user to the presence of
in the event of theft.
important operating and mainte-
nance (servicing) instructions in the
Model No.
WV-CP254H
literature accompanying the appli-
ance.
Serial No.
SA 1966
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
PREFACE
Panasonic’s WV-CP254H digital signal processing
and digital signal processing LSI’s. This model
color CCD camera introduces a new level of high
offers cutting-edge technology for advanced video
picture quality and high resolution through the use
surveillance.
of a 1/3-inch interline transfer CCD image sensor
having 752 horizontal pixels (picture elements),
FEATURES
1. The following functions are built in.
3. Signal-to-noise ratio of 50 dB (min)
(1) Auto Light Control (ALC)/Electronic Light
(at AGC OFF, weight ON)
Control (ELC)
(2) Automatic
Gain
Control
(AGC)
and
4. Horizontal resolution of 480 lines
Automatic Tracing White Balance (ATW)
(3) Camera synchronization mode selectable
5. Auto iris lens control selectable between
between internal (INT), Line-locked (LL)
video signal and DC power supply.
and Multiplexed Vertical Drive (VD2).
6. Auto black-and-white mode enables the cam-
2. Minimum Illumination of 1.0 lx (0.1 foot-can-
era to switch between color and black and
dle) at color mode, 0.15 lx (0.015 foot-candle)
white picture in response to light input.
at black and white mode with F1.4 lens.
PRECAUTIONS
1. Do not attempt to disassemble the camera.
3. Do not expose the camera to rain or
To prevent electric shock, do not remove
moisture, or try to operate it in wet areas.
screws or covers.
Turn the power off immediately and ask a
There are no user serviceable parts inside.
qualified
service
person
for
servicing.
Ask a qualified service person for servicing.
Moisture can damage the camera and also
create the danger of electric shock.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking,
4. Do not use strong or abrasive detergents
shaking, etc. The camera could be damaged
when cleaning the camera body.
by improper handling or storage.
Use a dry cloth to clean the camera when
dirty.
In case the dirt is hard to remove, use a mild
detergent and wipe gently. Afterwards, wipe
off the remained part of the detergent in it with
a dry cloth.
5. Clean the CCD faceplate with care.
7. Do not operate the camera beyond the
Do not clean the CCD with strong or abrasive
specified temperature, humidity or power
detergents. Use lens tissue or a cotton tipped
source ratings.
applicator and ethanol.
Use the camera under conditions where tem-
perature is between –10 °C - +50 °C (14 °F -
6. Never face the camera towards the sun.
122 °F), and humidity is below 90 %. The input
Do not aim the camera at bright objects.
power source is AC 24 V.
Whether the camera is in use or not, never
8. Do not connect this camera during a
aim it at the sun or other extremely bright
lightning storm.
objects. Otherwise, blooming or smear may
Otherwise, electric shock may be caused.
be caused.
Caution:
To prevent fire or electric shock hazard,
use a UL listed cable (VW-1, style 1007) for
the AC 24 V Input Cable.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
!7
!8
q
w
e
BLC
SHARP
COLOR
FIX
ON
VIDEO
HI
AGC
INT
HI
ALC
ATW1
1MI N
Pull and remove the cap
LL
LOW
ELC
ATW2
5SEC
CP254H
WV-
OFF
SOFT
DC
AUTO
LOW
DAY/NIGHT
GND
Day /
IN
Night
POWER
r
!6
!5
!0
i
!2
y
!4
t
u
o
!1
!3
Mount adapter
COLOR
BLC
SHARP
FIX
ON
VIDEO
HI
AGC
INT
HI
ALC
ATW1
1MI N
W V
-
C P 2
C P 2
5 4 H
5 4 H
LL
LOW
ELC
ATW2
5SEC
OFF
SOFT
DC
AUTO
LOW
DAY/NIGHT
q Auto Iris Lens Connector
i Detail/Aperture Level Selector (SHARP,
Supplies power and control signals to an auto
SOFT)
iris lens (not supplied).
The detail/aperture level can be selected with
this selector. Set it to the desired position
w Focus Lock Knob
while observing the picture on the monitor.
This knob adjusts the back-focal distance or
SHARP: Normal position.
picture focus.
SOFT: Select this position when a Quad
System is connected to this camera.
e Lens (option)
o Automatic Light Control/Electronic Light
r Mount Adapter
Control Selector (ALC, ELC)
The camera mounting screw hole is for mount-
Lets you select the mode according to the
ing the camera onto a mounting bracket. The
lens type used.
camera is originally designed to be mounted
ALC: Select this mode when an auto iris lens
from the bottom, however, a top-mounting
(ALC lens) is used with this camera.
type is also available. To mount from the top,
ELC: Select this mode when a fixed iris lens
remove the mount adapter from the bottom of
or manual iris lens is used with this cam-
the camera by removing two fixing screws.
era.
Attach the mount adapter to the top as shown
!0 Lens Drive Signal Selector (VIDEO, DC)
in the diagram, then mount the camera on the
mounting bracket. Make sure that two original
Lets you select the mode according to the
screws are used when mounting the mount
type of auto iris lens drive signal to be sup-
adapter; longer type screws may damage
plied to the lens from the auto iris lens con-
inner components, too shorter type screws
nector.
may cause the camera drop.
VIDEO: Select this mode if you are using a
auto iris lens that requires a video drive
t Synchronization Mode Selector (INT, LL)
signal.
Selects the camera synchronization mode as
DC: Select this mode if you are using a auto
either internal sync mode (INT) or line-lock
iris lens that requires a DC drive signal.
mode (LL).
!1 Auto-Tracing White Balance mode (ATW)
INT: Sets to internal 2:1 interlace.
Selector
LL: Sets to Line-lock mode.
The ATW mode can be selected with this
selector.
y Back Light Compensation Mode Selector
ATW1: Normal picture
(BLC ON, OFF)
ATW2: ATW in sodium lamp mode
Lets you select the mode according to the
position of the object and light conditions on
!2 Day/Night Mode Selector
the screen.
This function switches the condition of pic-
ON: Select this mode when a strong light
tures from color to black and white in low light
conditions.
such as a spotlight is in the background.
COLOR FIX: Color picture reverts to black-
OFF: Normal picture
and-white picture when an external
The factory default setting is ON.
day/night switching signal is received
(refer to Day/Night connections).
u AGC Level Selector
Note: When using this unit with infrared
AGC level can be selected with this selector.
rays or lighting of which color tem-
AGC automatically controls the gain of Image
perature is 3 000 K or less, select
brightness level.
this mode without fail, and short-cir-
HI: This setting raises more the gain and
cuit the Day/Night input terminals if
you select the black-and-white pic-
brightness of images under low light con-
ture.
ditions.
(The AUTO mode may cause hunt-
LOW: Normal position
ing.)
AUTO: The camera selects black-and-white
LOW: Color picture switches to black-and-
mode if the picture is dark, or color mode
white pictures at approx. 5 lx with F1.2
if the picture is bright enough.
lens.
The factory default setting is HI.
Notes:
• When using this unit with a video servo
!5 Power Indicator (POWER)
control lens, you may not switch from the
black-and-white mode to the color mode
!6 Day/Night Input Terminal
depending on lens iris.
(DAY/NIGHT IN/GND)
In such a case, operate the lens adjuster
This terminal is used for connecting the cam-
to open the aperture.
era to an external day/night detecting sensor.
• This function may not be activated auto-
Terminals opened: color picture
matically when a backlight or a strong
Terminals shortened: black-and-white picture
light source causes excessive contrast in
!7 Video Output Cable with BNC Connector
the picture. In such cases, use the
Connects the VIDEO IN connector of the mon-
Day/Night input terminals.
itor.
!3 Duration Time Selector
!8 Power Cable
This selector is available when the Day/night
switch position is 'AUTO'.
Switching time (5 sec. or 1 minute ) is selec-
table.
Cautions:
1. CONNECT THIS TO 24 V AC CLASS 2
!4 BW Level Selector
POWER SUPPLY ONLY. Be sure to connect
Selects the luminance level.
the grounding lead to the GND terminal.
This selector is available when the Day/night
2. To prevent fire or electric shock hazard,
switch position is 'AUTO'.
use a UL listed cable (VW-1, style 1007) for
According to the luminance level, this camera
the Input Terminal.
automatically switches the condition of picture
3. The
connections
should
comply
with
from color to black-and-white, or in reverse.
National Electrical Code (NEC).
HI: Color picture switches to black-and-white
pictures at approx. 7 lx with F1.2 lens.
CONNECTIONS
■ Connections
Caution:
The following connections should be made by qualified service personnel or system installers in
accordance with NEC 725-51.
Note: For the WV-CP254H Color CCTV Camera, do not use a transformer larger than 10VA.
Black (Live)
24 V AC, 60 Hz
White (Neutral)
(19.5 V-28 V)
Power Cable
(CLASS 2 SUPPLY ONLY)
Green/Yellow (Ground)
BNC Plug
BNC Plug
Video Output Cable
To Video IN
(CAMERA IN)
W V
-
C P 2
C P 2
5 4 H
5 4 H
BNC Plug
Cut the iris control cable at the edge of the lens
• Power supply connection
connector to remove the existing lens connector
Recommended wire gauge sizes for 24 V AC line.
and then remove the outer cable cover of the sup-
plied connector as shown in the diagram.
Copper wire
#24
#22
#20
#18
size (AWG)
(0.22mm
2
)
(0.33mm
2
)
(0.52mm
2
)
(0.83mm
2
)
The pin assignment of the lens connector is as fol-
lows:
(m)
20
30
45
75
Length
Pin 1: Power source; +9 V DC, 50 mA max.
of cable
(Approx.)
(ft)
65
100
160
260
Pin 2: Not used
Pin 3: Video signal; 0.7 V[p-p]/40 kΩ
Pin 4: Shield, ground
Cautions:
1. Shrinking the cable-entry seal is a one-time
Rib
procedure. Do not shrink the cable-entry
Pin 3
seal until it has been ascertained that the
Pin 1
unit is functioning.
2. CONNECT THIS TO 24 V AC CLASS 2
Pin 4
POWER SUPPLY ONLY. Be sure to connect
Pin 2
the grounding lead to the GND terminal.
3. To prevent fire or electric shock hazard,
Solder the lens cable to the pins of the sup-
use a UL listed cable (VW-1, style 1007) for
plied connector.
the Input Terminal.
4. The
connections
should
comply
with
National electrical Code (NEC).
Mounting the Lens
Caution:
Before you mount the lens, loosen the focus
Video Cable
lock knob, and rotate it clockwise until it
1. It is recommended to use a monitor whose
stops. If the ring is not at the end, the inner
resolution is at least equal to that of the
lens or CCD image sensor may be damaged.
camera.
q Mount the lens by turning it clockwise on the
2. The maximum extensible coaxial cable
lens mount of the camera.
length between the camera and the monitor
Note: When mounting the C-mount lens on
is shown below.
the camera, mount the C-mount adapter
by rotating it clockwise in advance.
w Connect the lens cable to the auto iris lens
Type of
RG-59/U RG-6/U RG-11/U RG-15/U
coaxial cable
(3C-2V)
(5C-2V) (7C-2V)
(10C-2V)
connector on the side of the camera.
Recommended (m)
250
500
600
800
maximum
Lens mount
cable length
(ft)
825
1 650
1 980
2 640
C-mount adapter
W V
-
C P 2
C P 2
5 4 H
5 4 H
w
Installation of Auto Iris Lens
Connector
Install the lens connector (YFE4191J100) when
Focus lock
using a video drive ALC lens.
knob
The installation should be made by qualified
service personnel or system installers.
Caution for Mounting the Lens
Day/Night Connections
The lens mount should be a C-mount or CS-mount
Connect an optical sensor to the Day/Night Input
(1”-32UN) and the lens weight should be less than
terminals.
450 g (0.99 lbs). If the lens is heavier, both the lens
• Day/Night Input terminals with a capacity of
and camera should be secured by using the sup-
5 V DC pull-up input, 0.2 mA or more.
porter.
OFF: break contacts: color picture
The protrusion at the rear of the lens should be as
ON: make contacts: black-and-white picture
shown below.
Note: To activate the Day/Night function, set
Day/Night Mode Selector to COLOR FIX.
C-mount: Less than 13 mm (1/2”)
CS-mount: Less than 8 mm (5/16”)
FOCUS OR FLANGE-BACK ADJUSTMENT
1. Loosen the focus lock knob.
2. Adjust the focus lock knob to obtain a focused
point while watching the monitor screen.
W V
-
C P 2
C P 2
3. Tighten the focus lock knob.
5 4 H
5 4 H
Caution: Tightening the knob by force will
Loosen
cause damage to the knob or deviation
Tighten
Focus lock
of focus.
knob
Note: The object may be out of focus when
using a source of near-infrared light than
using the visible light.
SPECIFICATIONS
Pick-up device:
752 (H) x 582 (V) pixels, interline transfer CCD
Scanning area:
5.59 (H) x 4.68 (V) mm (equivalent to scanning area of 1/3 in.
pick-up tube)
Synchronization:
internal, line-locked or multiplexed vertical drive (VD2),
selectable
Scanning system:
2 : 1 interlace
Scanning:
525 lines / 60 fields / 30 frames
Horizontal:
15.734 kHz
Vertical:
59.94 Hz
Horizontal resolution:
480 lines
1.0 V [P-P] NTSC composite 75 Ω / BNC connector
Video output:
Signal-to-noise ratio:
50 dB (min) (at AGC Off, weight On)
Electronic light control:
equivalent to continuous variable shutter speed between 1/50 s
and 1/15 000 s
Minimum illumination:
1.0 lx (0.1 foot-candle) at color mode, 0.15 lx (0.015 foot-candle) at
black and white mode with F1.4 lens
Aperture:
SHARP or SOFT, selectable
Lens mount:
CS-mount
−10 °C - +50 °C (14 °F - 122 °F)
Ambient operating temperature:
Ambient operating humidity:
less than 90 %
Power source and
power consumption:
24 V AC 60Hz, 3.3 W
Dimensions (without lens):
67 mm (W) x 65 mm (H) x 72.5 mm (D)
2-5/8" (W) x 2-9/16" (H) x 2-7/8" (D)
Weights (without lens):
0.33 kg (0.7 lbs)
Day/Night
selectable COLOR FIX (→ external terminal active) or AUTO
Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.
STANDARD ACCESSORIES
Operating Instructions (this document) ............................................. 1 pc.
The following parts are for installation:
Body cap ........................................................................................... 1 pc.
ALC lens connector (YFE4191J100) .................................................. 1 pc.
C-mount Adapter ............................................................................... 1 pc.
OPTIONAL ACCESSORIES
Lenses:
WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3,
WV-LA908C3, WV-LZ61/10, WV-LZ62/2, WV-LZ62/8, WV-LF4R5C3A, WV-LF9C3A,
WV-LZ61/15, WV-LZA61/2, WV-LZF61/2
Panasonic Digital Communications & Security Company
PANASONIC CANADA INC.
5770 Ambler Drive, Mississauga,
Unit of Matsushita Electric Corporation of America
Ontario, L4W 2T3 Canada (905)624-5010
Security Systems Group
PANASONIC SALES COMPANY
www.panasonic.com/cctv
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO INC.
Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina,
Zone Office
P.R. 00985 (809)750-4300
Eastern: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303
Central: 1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205
Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840
2003

Advertisement

loading

Summary of Contents for Panasonic WV-CP254H

  • Page 1 The following connections should be made by qualified service personnel or system installers in accordance with NEC 725-51. ATW2 5SEC CP254H SOFT AUTO DAY/NIGHT Day / Note: For the WV-CP254H Color CCTV Camera, do not use a transformer larger than 10VA. Night POWER Power Cable Mount adapter Video Output Cable SHARP COLOR VIDEO...
  • Page 2 Les branchements doivent être confiés à un dépanneur de système qualifié ou à des installateurs de système professionnels en conformité à NEC 725-51. Remarque: Dans le cas de caméra vidéo couleur CCTV WV-CP254H, ne pas se servir d'un transformateur d'alimentation plus puissant que 10VA.

This manual is also suitable for:

Wv-cp254htp