Download Print this page

Panasonic BB-HCM715A Installation Manual

Panasonic bb-hcm715a: install guide
Hide thumbs Also See for BB-HCM715A:

Advertisement

Quick Links

Installation Guide

Network Camera
BB-HCM715
Model No.
BB-HCM735
This manual is written for both the BB-HCM715 (Indoor Use Only) and the BB-HCM735 (Outdoor Ready). Available features and operations vary slightly
depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.
Model number suffixes ("A" and "CE") are omitted from the following model numbers shown in this document, unless necessary.
BB-HCM715A, BB-HCM715CE, BB-HCM735A, BB-HCM735CE
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
• This document (Installation Guide) explains how to physically connect the
camera to the power supply and network, as well how to mount or place the
camera for regular use.
• The Setup Guide describes how to set up the camera so that it can be
accessed using a PC.
• Refer to the Operating Instructions on the CD-ROM for details regarding
the camera's features.
Abbreviations
• UPnP is the abbreviation for "Universal Plug and Play".
• The Network Camera is referred to as "the camera" in this document.
• The Setup CD-ROM is referred to as "the CD-ROM" in this document.
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation
Camera Diagram
Confirm that you have all the
Make sure you know the
items required for
names of the camera's
installation.
physical features.
Preparation
1.
Confirm the following items are included in the camera's packaging.
Main Unit (1 pc.)
Screw A
BB-HCM715 (1pc. for the
safety wire)
Order No. PQHV2610PJ65
BB-HCM735 (1pc. for the
safety wire, 4pcs. for the
connector cover)
Order No. XTN26+10GVW
Important Information (1 pc.)
Installation Guide (this document) (1 pc.)
Setup Guide (1 pc.)
Stand-alone SD Memory Card Recording Guide (1 pc.)
Sunshade (1pc.)
[BB-HCM735 Only]
Order No. PQKV10074Z1
2.
You will need the following additional items to install and configure the camera.
– a PC (see the system requirements in the Important Information document)
– a router
Option
You can also connect the camera using the optional Panasonic BB-HCA7A, BB-HCA7CE or BB-HCA7E AC adaptor. The optional AC adaptor includes the
following items. (For more information, consult your authorized Panasonic dealer.)
BB-HCA7A
AC Adaptor (1 pc.)
Cord Length: About 3 m
(9 feet 10 inches)
BB-HCA7CE (2 pin AC cord)
AC Adaptor (1 pc.)
Cord Length: About 3 m
(9 feet 10 inches)
BB-HCA7E (3 pin AC cord)
AC Adaptor (1 pc.)
Cord Length: About 3 m
(9 feet 10 inches)
• The AC adaptor, the AC adaptor cord, the AC cord, and the extension cord are not splash resistant, and are intended for indoor use only. The AC adaptor, the
AC adaptor cord, the AC cord, and the extension cord must be waterproofed for outside use.
© Panasonic System Networks Co., Ltd. 2009
PNQX2129YA KK0609CM1129
Please read this document before using the product, and save this document for future
reference. Panasonic Network Camera Website:
http://panasonic.net/pcc/ipcam/
(PoE Ready)
Indoor Use Only
Outdoor Ready
Connections
Connecting the camera to
your network and to the power
outlet.
Flexible Stand (1 pc.)
Order No. PNZMHCM515A
Screw B (1pc. for the safety
wire, 3pcs. for the flexible
stand)
Order No. XTB4+20AFJ
Connector Cover (1pc.)
[BB-HCM735 Only]
Order No. PQYCHCM531A
• Refer to the Troubleshooting Guide on the CD-ROM if you have any
problems configuring or using the camera.
• The Stand-alone SD Memory Card Recording Guide describes how to
record images to an SD memory card without using a PC.
• The illustrations used in Installation Guide are of BB-HCM735.
• The term "SD memory card" is used in this document to refer to SD memory
cards and SDHC memory cards.
Setup
Setting up the camera (described in the included
Setup Guide). This involves configuring the camera
so that it can be accessed from a PC.
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the camera
when mounting it.
Washer S (1 pc.)
Order No. XWG26D12VW
Used when securing the
safety wire to the camera.
Setup CD-ROM (1 pc.)
Order No. PNQC1016N
Contains the Setup Program needed to configure the camera, as well as the
camera's documentation.*
*See the included Important Information for a description of each document.
Foam Strip (1pc.)
[BB-HCM735 Only]
Order No. PQHG10748Z
– a LAN cable (CAT-5 straight cable)
AC Cord (1 pc.)
Cord Length: About 1.8 m
(5 feet 11 inches)
AC Cord (1 pc.)
Cord Length: About 1.8 m
(5 feet 11 inches)
AC Cord (1 pc.)
Cord Length: About 1.8 m
(5 feet 11 inches)
Mounting
Mounting or placing the
camera.
SD Card Cover (Hard
type) (1pc.)
[BB-HCM715 Only]
Order No. PNKV1065Z1
Washer L (1 pc.)
Order No. XWG4F16VW
Used when securing the
safety wire to the ceiling or
wall.
Self Bonding Tape (1pc.)
[BB-HCM735 Only]
Order No. PSHG1235Z
Extension Cord (1 pc.)
Cord Length: About 7 m
(23 feet)
Extension Cord (1 pc.)
Cord Length: About 7 m
(23 feet)
Extension Cord (1 pc.)
Cord Length: About 7 m
(23 feet)
1

Advertisement

loading

Summary of Contents for Panasonic BB-HCM715A

  • Page 1: Installation Guide

    – a PC (see the system requirements in the Important Information document) – a router Option You can also connect the camera using the optional Panasonic BB-HCA7A, BB-HCA7CE or BB-HCA7E AC adaptor. The optional AC adaptor includes the following items. (For more information, consult your authorized Panasonic dealer.) BB-HCA7A AC Adaptor (1 pc.)
  • Page 2: Rear View

    Before proceeding, confirm that your PC is connected to your router and can access the Internet. Also confirm that your router’s UPnP routers have UPnP ™ turned off by default.) Refer to the operating instructions included with your router or to the Panasonic Network Camera website (http://panasonic.net/pcc/ipcam/) for more information. When connecting the camera using PoE (Power over Ethernet) Connect the camera to your PoE hub using a LAN cable (Cat-5 straight cable) as described below.
  • Page 3: Mounting The Camera

    Connecting a Video Device You can connect a TV or other video device (NTSC or PAL format) to the camera to monitor or record camera images. Connect the video device as shown below. For video device Connecting External Sensors The camera’s external I/O interface allows you to connect 2 devices (such as sensors, motion detectors, etc.) that can be used to trigger the camera’s image buffering and transferring features (see Section 2 Using Triggers to Buffer and Transfer Images in the Operating Instructions on the CD-ROM).
  • Page 4 Flexible Stand Mount Tripod Mount Screw the threaded mount into the stand/tripod mounting hole. Turn the grip firmly. Stand/tripod mounting hole Threaded mount Grip Flexible stand Ceiling/Wall Mount Wiring without making a hole for a cable in the ceiling or wall For BB-HCM735: Before following the procedures below, we recommend passing all cables (AC adaptor, LAN, audio/video, etc.) through a duct (i.e., hose, tube, etc.) for...

This manual is also suitable for:

Bb-hcm735aBb-hcm735Bb-hcm715