Link To Cell; Link To Cell Feature; Registering A Cellular Phone - Panasonic KX-TG7622B Operating Instructions Manual

Link-to-cell cellular convergence solution
Hide thumbs Also See for KX-TG7622B:
Table of Contents

Advertisement

Link to cell feature

To use this feature, you must first
register and connect your cellular
phones to the base unit (page 19).
Your cellular phones must be Bluetooth
wireless technology compatible with this
product.
This feature allows you to:
– make or answer cellular calls using
your home phone (handset or base
unit) with better reception.
– maximize the benefits of cellular
services (such as free night and
weekend calls, or cellular to cellular
call plans) by utilizing unused peak
minutes with your home phone.
– conserve the battery power of your
cellular phone while the unit is on a
cellular call. (We recommend
charging your cellular phone during
the cellular call as your cellular phone
battery is being consumed.)
Important:
R Up to 2 cellular phones can be
registered. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
R Locate your cellular phone near the
base unit. If the cellular phone is too
close to the base unit during a cellular
call, you may hear noise. For best
performance, we recommend placing
the cellular phone between 0.6 m to 3
m (2 feet to 10 feet) away from the
base unit.
Trademarks
R The Bluetooth
are owned by the Bluetooth SIG, Inc.
and any use of such marks by
Panasonic Corporation is under
license. All other trademarks identified
herein are the property of their
respective owners.
For assistance, please visit http://www.panasonic.com/help
®
word mark and logos
Registering a cellular
phone
Important:
R For more details and the list of
compatible cellular phones, please
visit our Web site:
http://www.panasonic.com/link2cell
R Before registering a Bluetooth
enabled cellular phone to the base
unit:
– we recommend you change the
PIN (page 22).
– make sure that no Bluetooth device
such as a Bluetooth headset is
connected to your cellular phone.
1
Handset:
MMENUN
For CELL 1: #6241
For CELL 2: #6242
R After the CELL 1 or CELL 2
indicator on the base unit starts
flashing red, the rest of the
procedure must be completed
within 5 minutes.
2
Your cellular phone:
While the CELL 1 or CELL 2
indicator is flashing red, follow the
instructions of your cellular phone to
enter the registration mode.
R Depending on your cellular
phone, it may ask you to enter the
base unit PIN (default: "0000").
3
Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds
to complete registration.
R When the CELL 1 or CELL 2
indicator lights green, the cellular
phone is connected to the base
unit. You are ready to make
cellular calls.
4
To select which unit receives calls
for the cellular line, press MOKN then
continue from step 3, "Selecting

Link to Cell

19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents