Page 1
GREASE OR HYDRAULIC OIL REEL 3/8’’ x 50FT CT1913 Ref no. ZYS07-1-15 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: GREASE OR HYDRAULIC OIL REEL 3/8” x 50FT Model: CT1913 (Ref no. ZYS07-1-15) Applicable EC Directives: EC Machinery Directive 2006/42/EC Harmonized standards EN ISO 12100:2010...
Attention: Read through the complete manual prior to the initial use. SPECIFICATIONS HOSE LENGTH MAX PSI AIR INLET AIR OUTLET 15+1Meters 2250 PSI 1/4” 3/8” BSPT TOOL USE AND CARE 1. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.
AIR SOURCE WARNING • Never connect to an air source that is capable of exceeding 2250 psi. Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons. • Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool.
GENERAL OPERATING INSTRUCTIONS 1. Check the Wheel operation by slowly pulling the Hose out. You should hear a clicking noise. 2. To lock the Hose, pull it out a minimum of 1/2 revolution and it will stay locked after the first, second, or third click. 3.
operation. 2. AFTER EACH USE, re-wind the hose onto the reel and wipe the Hose Reel clean with a dry cloth. WARNING • Internal spring is not user serviceable or user-replaceable HOSE REPLACEMENT 1. Remove the Hose Stopper from the hose and set aside. 2.
Page 8
CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...