Changing The Wrist Band - Garmin Forerunner 610 Owner's Manual

replacing the Heart rate
Monitor Battery
1. Use a small Phillips screwdriver to
remove the four screws on the back
of the module.
2. Remove the cover and battery.
3. Wait 30 seconds.
4. Insert the new battery with the
positive side facing up.
NOTE: Do not damage or lose the
O-ring gasket.
5. Replace the back cover and the four
screws.
After you replace the heart rate monitor
battery, you must pair it with the device
again.
Forerunner 610 Owner's Manual

Changing the wrist Band

You can purchase a fabric wrist band
accessory for the Forerunner
(http://buy.garmin.com).
1. Use the pin tool
pins ➋.
➋
NOTE: Do not discard the pins.
2. Align the top of the Forerunner
with the connector ➍.
Appendix
to remove the
➊
➊
➌
43