Optical Drive - HP Compaq Presario CQ71 Maintenance And Service Manual

Optical drive

NOTE: The optical drive spare part kit includes an optical drive bezel.
Description
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Remove the PM2.5×7.0 retention screw (1) to release the optical drive from the computer.
2. Insert a paper clip (2) to extend the disc tray.
3. Grasp the tray and slide the optical drive (3) out of the optical drive bay.
To insert the optical drive, insert the rear edge of the optical drive into the optical drive bay and slide it
in until the optical drive is seated.
Battery on page 47).
Spare part number
513773-001
513772-001
Component replacement procedures 53