Mounting The Monitor - Compaq 1825 User Manual

1825 flat Panel Monitor
2. Remove the four screws as shown in the following
illustration.
CAUTION: Ensure that the bottom of the monitor base is positioned
Ä
over a table or desktop before removing the base from the monitor.
3. Remove the monitor base from the monitor.

Mounting the Monitor

1. Remove the monitor base. Refer to "Removing the Monitor
Base" steps in the previous section.
When the base is removed, four threaded mounting holes are
exposed on the monitor panel to be used for mounting purposes.
These mounting holes are spaced 100 mm apart and are
compliant with the Video Electronics Standards Association
(VESA) standard for mounting flat panel displays.
8 User's Guide