Hardware, Software, And Documentation Requirements - Nortel Remote Gateway 9110 Release Note

Standard 1.0
Hardware, software, and documentation
requirements
This section identifies the following items that are required to support this
release:
supported PBX platforms and software releases
current hardware, software, and firmware versions
documentation requirements
Meridian 1 PBX software and platforms
Meridian 1 PBX 11, 11C – Cabinet, 11C – Chassis, 11E, 51C, 61C, 71C, and
81C platforms are supported using software release 23 (or higher) with the
following four packages:
package# 0
package# 19
package# 95
package# 170 ARIE (Meridian Modular Sets)
Note: The Meridian 1 PBX 11 Chassis platform restrictions are shown in the
following table:
Hardware
16-port (single-slot) RLC NTDR68xx
32-port (double-slot) RLC NTDR71xx
Since the 32-port RLC requires two backplane connections, it cannot be
provisioned in slot 10 of an Meridian 1 PBX 11 cabinet, as this slot has only one
backplane connection.
8
BASIC (Basic Call Processing)
DDSP (Digit Display)
CPND (Caller Party Name Display)
1.6.0 Release Notes for Remote Gateway 9100 Series and RLC
Restrictions
supported in slots 1, 2, 3 in the main chassis
and 7, 8, 9, 10 in the expander chassis
supported in slot 1 or 2 in the main chassis
(maximum of 1) and 7, 8, or 9 in the
expander chassis (maximum of 2)