Nortel Remote Gateway 9110 Release Note page 21

June 2005
M3905 digital telephone sets do not play tone B for a second
incoming call (Q00557165)
If an M3905 digital telephone set is on a call when another call comes in, it does
not alert the user by playing tone B. The only indication that the user has of a
second incoming call is the flashing of the call indicator.
After re-boot of Remote Gateway 9150 unit, ATA port does not work
(Q00659815)
After re-boot of a Remote Gateway 9150 unit, the ATA port does not work. As a
work around, re-boot each ATA as well.
Comfort noise does not accurately track background noise
(Q00666182)
The Remote Gateway 9100 Series product does generate comfort noise, but at a
fixed level. This issue can cause noise pumping to occur. When the "silent"
party starts speaking again, the noise floor can change and it can be noticeable.
You can avoid this by disabling VAD.
Display Log number 93 is not always logged (Q00688016)
Display Log number 93 is not logged when dialing from the local key. This log
indicates that the Emergency Access Code (EAC) has been dialed from a port.
When an Emergency number is dialed using the local key, it does not display in
the Display Logs.
Multiple sets with Call Forward on local BRI inbound call are not
treated correctly (Q00699973)
When placing two or more digital telephone sets in DN's to Alert Trunk Group
mode and placing two or more of these same digital telephone sets in Call
Forward to a PBX DN mode, multiple digital telephone sets with Call Forward
on a local BRI inbound telephone call are not treated correctly. The single
incoming BRI telephone call gets answered and does not terminate the second or
more Call Forward telephone call.
1.6.0 Release Notes for Remote Gateway 9100 Series and RLC 21