Upgrade File Names For This Release - Nortel Remote Gateway 9110 Release Note

Standard 1.0

Upgrade file names for this release

Firmware and software files are initially provided on the Remote Gateway 9100
Series Product CD-ROM (NTDR81AH). Upgrade files that are downloaded
from the Nortel website are provided in self-extracting executable files.
The following table identifies the upgrade files supported by this document for
the Meridian 1 PBX release.
Notes:
If you are using an CS 2100 PBX, contact your Nortel support
representative to determine the CS 2100 upgrade file names.
To check the current firmware follow the procedure on page 14.
Component
RLC
Remote Gateway 9150 unit
Remote Gateway 911x series units –
NTDR77BC – Release 4 and prior
Remote Gateway 9115 units –
NTDR77BC – Release 5 and higher
Digital Telephone Internal IP Adapter
units
Digital Telephone External IP
Adapter units – NTDE02BC –
Release 4 and prior
Digital Telephone External IP
Adapter units – NTDE02BC –
Release 5 and higher
ISDN BRI U-interface module
ISDN BRI ST-interface module
12
Nortel delivery file
name
rlc-1_6_0.exe
9150-1_6_0.exe
911x-1_6_0.exe
911x40-1_6_0.exe
IPAdapter-1_6_0.exe
IPAdapter-1_6_0.exe
IPAdapter40-1_6_0.exe IPAdapter40-1_6_0.upg
isdn34u.exe
isdn34s.exe
1.6.0 Release Notes for Remote Gateway 9100 Series and RLC
Upgrade file name
rlc-1_6_0.upg
9150-1_6_0.upg
911x-1_6_0.upg
911x40-1_6_0.upg
IPAdapter-1_6_0.upg
IPAdapter-1_6_0.upg
bri34u.upg
bri34s.upg