- Read and follow installation instructions before plugging or wiring in machine to electrical circuit. Warranty will
be void if unit is connected to any voltage other than that listed on the name plate.
Plug or wire brewer to appropriate voltage circuit as indicated on serial tag. Turn master switch, located on rear of
brewer, to the on position.
For pump style airpots, remove the pump stem. Place the empty dispenser into position below the brewbasket.
Raise the top evaporation cover and pour ONE pour pitcher of water through the pour-in screen into basin.
The brewer will begin to brew as the water level in the basin rises and activates the internal float switch. This first pot
will be a few ounces short due to some water retention in the system.
Machine is now ready to use and will yield a full pot on following brew cycles.
Newco Enterprises, Inc. coffee brewers are warranted against defects in workmanship or materials, under normal use, for
90 days from the date of purchase. Brewer parts are warranted against defect for 12 months from date of purchase.
Liability in all events is limited to the purchase price paid and liability under the aforesaid warranty is limited to replacing
or repairing any part or parts which are defective in material or workmanship, and returned to our factory, shipping cost prepaid. No
warranty expressed or implied, other than the aforesaid is made or authorized by Newco enterprises, Inc.
Prompt disposition will be made if item proves to be defective, within warranty. Before returning any item, write or call
Newco Enterprises, Inc., giving model number, serial number, and date of purchase, and describe the nature of the defect.
NEWCO ENTERPRISES, INC.
AKH-AP POUR OVER
* 1775 WATTS 13 AMPS @ 120 VOLTS
* 8-1/2" WIDE
* 16-1/2" DEEP
* 22-7/8" HIGH
PN 110329 REV 10-01