Coleman 5059-707 Assembly And Instruction Sheet

®
Assembly and Instruction Sheet
for 33" Square Fireplace
Models 5059-707 & 5059A720
Follow these instructions for assembly and read carefully, particularly the
safety statements. The safety alert symbol,
symbol used to identify safety information about hazards that can result in
personal injury. When this symbol is used you should pay very close atten-
tion to what is written. Review these instructions before beginning assembly
or using your fireplace.
Fireplace Parts Check List
• Check package for all parts needed for assembly.
■ ■
1. Firebox
■ ■
2. Leg Support Ring
■ ■
3. Firebox Support Ring
■ ■
4. Protective Cover
■ ■
5. Screen Lifting Tool
1
8
9
• Check all items for shipping damage. Call Coleman at 1-800-835-3278 or
TDD: 316-832-8707 if you have any problems.
1.
Carefully unpack all parts from shipping box.
2.
Align holes in Leg Bracket and assemble to Leg Support Ring as
shown. Attach with small bolts and nuts. Hand tighten.
Leg
Bracket
Leg Support
Ring
is a universally recognized
■ ■
6. Grate
■ ■
7. Leg Brackets
■ ■
8. Hardware Kit w/handle
■ ■
9. Screen Assembly
3
2
6
7
Assembly
FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE,
• Outdoor use only. Never use in enclosed area. Use in unventilated areas
will endanger your life.
• Keep away from all combustible materials including gasoline and other
flammable liquids and vapors.
• Use on a level, noncombustible surface only. Keep away from house,
garage, balconies, or eave overhangs.
• Keep out of the reach of children.
• Be sure screen is in place while in use and do not use in windy conditions.
• Do not overfill firebox or use to burn leaves and trash.
• Exercise the same care you would with an open fire.
• Never leave unit unattended when hot or in use.
• Completely extinguish fire before leaving.
• Use gloves when handling or moving. Ashes can remain warm for a long
time after extinguishing.
• Dispose of cold ashes properly.
• Do not modify in any way nor use with parts not expressly approved by
Coleman.
• Combustion by-products produced when using this product contain
chemicals known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Contact local authorities regarding possible burn restrictions before using product.
3.
Place Firebox Support Ring on top of Leg Brackets as shown. Carefully
align holes as shown.
Firebox Support Ring
4
5
4.
Insert long bolts and secure with nuts. Tighten all bolts in Leg Support
Ring and Firebox Support Ring.
(continued on other side)
SERIOUS INJURY OR DEATH.
WARNING
Assembly
(cont.)
Leg Bracket
Align
holes
Tighten all
bolts