Prepare The Router For Installation; Hardware Features; Front Panel - NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium Edition User Manual

N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800

Prepare the Router for Installation

Carefully remove the protective film from the top of your router.
1.
Set up your router by aligning the
2.
arrow on the base with the arrow on
the back of the case, and sliding the
router onto the base.
Figure 2. Align arrow on base with
arrow on case back
Place your router in an area suitable
3.
for installation (near an AC power
outlet and accessible to the Ethernet
cables for your wired computers). See
Position Your Wireless Router
page 14 for more information.

Hardware Features

Before you cable your router, take a moment to become familiar with the label and the front
and back panels. Pay particular attention to the LEDs on the front panel.

Front Panel

The router front panel has the LEDs and icons shown in the figure. Note that the Wireless
and WPS icons are buttons.
Power 2.4 GHz
Figure 3. Front panel LED and button icons
on
5 GHz USB Internet Ethernet (LAN) Wireless On/Off
Hardware Setup
11
Restore
Factory
Settings
button
WPS