Multitech RouteFinder RF560VPN Reference Manual
Multi-tech routefinder rf560vpn security appliance: reference guide
Hide thumbs
Also See for RouteFinder RF560VPN:
- Reference manual (13 pages) ,
- Quick start manual (40 pages) ,
- User manual (82 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
RF760VPN
RF660VPN
RF600VPN
VPN Tunnel Configured for Manual Mode Examples
IP Sec Pass-Through in Manual Mode Examples
Reference Guide
Advertisement
Related Manuals for Multitech RouteFinder RF560VPN
Summary of Contents for Multitech RouteFinder RF560VPN
- Page 1 RF760VPN RF660VPN RF600VPN VPN Tunnel Configured for Manual Mode Examples IP Sec Pass-Through in Manual Mode Examples Reference Guide...
- Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
- Page 3 Site A and Site B communicate through a secure connection over the Internet using a VPN tunnel in Manual Mode. This example assumes both VPN gateways have fixed IP addresses. RF760VPN, RF660VPN or RF600VPN LAN-to-LAN Configuration Diagram: Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D)
- Page 4 168-bit 3DES encryption using IKE and PSK key management. In addition, they provide very high performance up to 50Mbps of 3DES encryption throughput. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Site B - Static IP Addresses (Input These Parameters For the RF660VPN in the Branch Office).
- Page 5 Default gateway = ___.___.___.___ Host name = _____________ Eth0 = LAN, ___.___.___.___, 255.255.255.0 Eth1 = WAN, ___.___.___.___, 255.255.255.___ Eth2 = DMZ (don’t care) Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) IP Address Net Mask ___.___._._ ___ ___.___._ 192.168.2.1 255.255.255.0...
- Page 6 User and Password entries from the default (admin) to something else. (If Windows displays the AutoComplete screen, for security reasons, you may want to click No to tell the Windows OS to not remember the Password.) Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) 192.168.2.100 subnet.
- Page 7 If someone else is already logged in to the RouteFinder, or you were logged in recently, the message below is displayed. Click the Yes button. The Login screen displays. Repeat step 5. The Web Management Home screen is displayed. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 1 – Site A...
- Page 8 Click on Administration > System Setup to set the correct zone, date and time for your location. Administration System Setup System Time Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 1 – Site A...
- Page 9 The following screen displays. Saving your settings will take several minutes. Since you kept the LAN IP address the same, it is not necessary to change this system to a new IP address. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 1 – Site A...
- Page 10 This allows the Remote LAN at Site B to access the RouteFinder and LAN at Site A. After the rule is entered, it displays under User Defined Packet Filter Rules. RemoteLAN Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) 192.168.10.0 255.255.255.0 204.26.122.3...
- Page 11 The Add a Manual Connection screen displays. Connection name Enter a text name that will identify the connection for you. Compression Check the compression checkbox to enable IPCOMP, the compression algorithm. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 1 – Site A...
-
Page 12: Authentication Method
This completes the configuration of the RF660VPN at Site A. Now, go to the RF660VPN at Site B and access the LAN port from a workstation Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) RemoteWAN_IP RemoteLAN Edit|Delete as done for Site A. - Page 13 Use the same settings as used for Site A, and add a manual connection using the same settings as used for Site A. This completes the configuration of the RF660VPN at Site B for Example 1. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) https://192.168.10.1 and press Enter.
- Page 14 The LAN port LINK LED should be on and the ACT LED should blink on each time you ping the RF660VPN. Also verify that the RF660VPN is configured properly. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 1 – Testing...
- Page 15 The LAN port LINK LED should be on and the ACT LED should blink on each time you ping the RF660VPN. Also verify that the RF660VPN is configured properly. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 1 – Testing...
- Page 16 RF760VPN, RF660VPN or RF600VPN at Site A and an RF760VPN, RF660VPN or RF600VPN behind a NAT box at Site B, so that Site A and B can communicate through a secure connection over the Internet using IPSec Pass- Through in Manual Mode. Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D)
- Page 17 Local LAN = LAN Remote Gateway IP = RemoteWAN_IP Remote LAN = RemoteLAN Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) Example 2 – Overview Site B - Static IP Addresses (Input These Parameters For the RF660VPN in the Branch Office 1.
-
Page 18: Site A Configuration
Configure the NAT box for an IPSec Pass-Through by specifying the IP address and subnet mask assigned by the ISP for Site B (Ex: 204.26.122.3). Then specify the ISP Gateway Address (Ex: 204.26.122.103). Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D) To configure the RF760VPN/RF660VPN/RF600VPN at Site A, follow the same procedure as in Example 1 –...