Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Multitech MultiConnect BT MTS2BTA
Summary of Contents for Multitech MultiConnect BT MTS2BTA
- Page 1 ™ MultiConnect ® Serial-to-Bluetooth Adapter Quick Start Guide...
- Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
-
Page 3: General Safety
This guide shows you how to set up your MultiConnect Adapter. For detailed information, product specifications, and more, see the User Guide, available on the MultiConnect CD and the Multi-Tech Web site. General Safety The modem is designed for and intended to be used in fixed and mobile applications. -
Page 4: Vehicle Safety
One MultiConnect CD containing the adapter drivers, User Guide, Quick Start Guide, AT Commands Reference Guide, Global Wizard software, and link to Adobe Web site for Acrobat Reader. MTS2BTA-R (Powered by Pin 6 of an RS-232 Cable) • One Serial-to-Bluetooth Adapter •... -
Page 5: Installation And Cabling
Installation and Cabling Attaching the MultiConnect Adapter to a Fixed Location Typically, the MultiConnect is mounted against a flat surface with two mounting screws. Drill the mounting holes at the desired mounting location. The mounting holes must be separated by 4-15/16 inches center-to- center. - Page 6 Multi-Tech Systems, Inc. Quick Start Guide Making the Connections Directions for the MTS2BTA (Externally Powered) Turn off your PC. Place the adapter in a convenient location. Connect it to your PC’s serial port and plug in the power. Directions for the MTS2BTA-R (Powered through Pin 6 of an RS-232 Cable) Turn off your PC.
- Page 7 Serial-to-Bluetooth Adapter Optional – Directions for Direct DC Power Connection for Use with the MTS2BTA • Connect a fused DC power cable into the power connector on the MultiModem. • Then attach the two wires at the other end of the...
- Page 8 Multi-Tech Systems, Inc. Quick Start Guide Using AT Commands to Set Parameters Parameters, such as the Bluetooth Name, Service Name, Device Class, and Serial Port settings can be viewed and configured. This can be done locally through the serial port UART or from a remote Bluetooth RF link.
- Page 9 Place radio into Fast Data Mode. Sent: +++<cr> // Places radio in Command Mode Reply: <cr_lf>OK<cr_lf> Sent: ATMF<cr> // Places radio in Fast Data Mode Reply: <cr_lf>OK<cr_lf> Send Data. Note: Sending commands from the slave when the slave connects in Fast Data Mode (ATSW25/ or issue ATMF): All valid AT commands sent through the Slave's UART will be interpreted and responded by the Master as if it were the local Slave radio.
- Page 10 Multi-Tech Systems, Inc. Quick Start Guide Slave Command Sequence Example From Power Up: Check and verify Communication to Slave. Sent: AT<cr> Reply: <cr_lf>OK<cr_lf> Get information on Slave Bluetooth address. Sent: ATSi,1<cr> Reply: 12-digit address <cr_lf>OK<cr_lf> Set Slave to automatically connect in Fast Data Mode on Bluetooth connection.
- Page 12 82010051L...