Multitech MultiConnect BT MTS2BTA User Manual
Serial-to-bluetooth adapter
Hide thumbs
Also See for MultiConnect BT MTS2BTA:
- User manual (20 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Multitech MultiConnect BT MTS2BTA
Summary of Contents for Multitech MultiConnect BT MTS2BTA
-
Page 1: User Guide
™ MultiConnect ® Serial-to-Bluetooth Adapter MTS2BTA MTS2BTA-R User Guide... - Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
-
Page 3: Table Of Contents
Making the Connections ... 10 Directions for the MTS2BTA (Externally Powered) ... 10 Directions for the MTS2BTA-R (Powered through Pin 6 of an RS-232 Cable) ... 10 Optional – Direct DC Power Connection for Use with the MTS2BTA ... 11 Chapter 3 –... -
Page 4: Chapter 1 - Description And Specifications
Although input protection circuitry has been incorporated into the devices to minimize the effect of this static buildup, proper precautions should be taken to avoid exposure to electrostatic discharge during handing and operation. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 1 – Description and Specifications... -
Page 5: Maintenance Of The Serial-To-Bluetooth Adapter
Do not place the adapter alongside computer discs, credit or travel cards, or other magnetic media. The information contained on discs or cards may be affected by the phone. • The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech’s accessory specifications may invalidate the warranty of the MultiConnect Adapter. •... -
Page 6: Technical Specifications
FHSS (Frequent Hopping Spread Spectrum) • 128-bit encryption; 10 alphanumeric Personal Identification Number (PIN) • Error correction schemes for guaranteed packet delivery Warranty Two Years Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 1 – Description and Specifications 50-byte RX buffer... -
Page 7: Rf Interface
60 seconds ATDM Master Mode = indefinitely (need to perform ATUCL to cancel last command) Timeout for loss of Bluetooth connection = Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 1 – Description and Specifications 2402 – 2480MHz FHSS/GFSK... -
Page 8: Led Indicators
It goes off when the communications program disconnects the COM port. When it goes off, a connected adapter will disconnect. Power. This LED Indicates the presence of DC power when lit. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 1 – Description and Specifications... -
Page 9: Chapter 2 - Installation And Cabling
To attach the mounting bracket, slide it into the corresponding slot on the back of the MultiConnect chassis. Attach the adapter to the surface with two screws. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 2 – Installation and Cabling... -
Page 10: Making The Connections
Turn off your PC. Place the adapter in a convenient location. Connect it to your PC’s serial port and plug in the power. Directions for the MTS2BTA-R (Powered through Pin 6 of an RS-232 Cable) Turn off your PC. Place the adapter in a convenient location. Then connect it to your PC’s serial port. -
Page 11: Optional - Direct Dc Power Connection For Use With The Mts2Bta
DC fuse/terminal block). Warning: Over-voltage protection is provided on the device. To ensure complete protection, you may want to add additional filtering to the DC input. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 2 – Installation and Cabling... -
Page 12: Chapter 3 - At Commands And Configuration Examples
Configuration Examples AT Command Reference Guide AT commands for the Serial-to-Bluetooth Adapter are published in a separate Reference Guide included on the product CD and posted on the Multi-Tech Web site. Using AT Commands Default Settings / Changing Configuration Parameters, such as the Bluetooth Name, Service Name, Class of Device and Serial Port settings can be viewed and configured. -
Page 13: Setting Parameters
Note about Being Connected in Fast Data Mode If connected in Fast Data Mode, it is necessary to reset the master or slave to break the connection. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 3 – AT Commands and Configuration Examples // Clears radio state... - Page 14 Note: This command sequence assumes the radio is set to factory defaults that allow it to automatically come up and be ready to connect as a Slave from a Master request. Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Chapter 3 – AT Commands and Configuration Examples...
-
Page 15: Test Procedures Using At Commands
Do this for both master and slave Bluetooth adapters. Use terminal emulator like HyperTerminal or ZOC to communicate to Bluetooth socket modem using AT command set. Set baud rate to 9600bps. If MTS2BTA has label with different baud rate then set emulator to match with this baud rate. -
Page 16: Disabling Flow Control Using At Commands
Reply: OK<cr_lf> Now you can communicate with the Bluetooth device with flow control turned off. Configuring to Use DTR for Resetting the MTS2BTA Using AT Commands Using a terminal screen, issue commands so when DTR goes off the adapter is reset. -
Page 17: Chapter 4 - Peripheral Devices
Antenna Cable An optional 6” antenna cable (SMA Jack to MMCX Plug) can be ordered from Multi-Tech Systems, Inc. Part Number CARSMA-MMCX-1 MMCX Plug SMA Jack Approved Antenna Cable Parts... -
Page 18: Pin Assignments For The Serial Port
Pin Assignments for the Serial Port Female End of the Multi-Tech Adapter The following tables explain the Multi-Tech Adapter pin functions. External Power Signal IN/OUT Pin 1 CD Pin 2 TX Pin 3 RX Pin 4 DTR Pin 5 GND... -
Page 19: Appendix A - Regulatory Compliance Statements
The WEEE Directive covers all Multi-Tech products imported into the EU as of August 13, 2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance the costs of recovery from municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements. -
Page 20: Information On Hs/Ts Substances According To Chinese Standards
Information Products (EIP) # 39, also known as China RoHS, the following information is provided regarding the names and concentration levels of Toxic Substances (TS) or Hazardous Substances (HS) which may be contained in Multi-Tech Systems Inc. products relative to the EIP standards set by China’s Ministry of Information Industry (MII). -
Page 21: Information On Hs/Ts Substances According To Chinese Standards (In Chinese)
Information on HS/TS Substances According to Chinese Standards (in Chinese) 依照中国标准的有毒有害物质信息 根据中华人民共和国信息产业部 (MII) 制定的电子信息产品 (EIP) 标准－中华人民共和国《电子信息产品污染控制管理办法》（第 39 号），也称作中国 RoHS，下表列出了 Multi-Tech Systems, Inc. 产品中可能含有的有毒物质 (TS) 或有害物质 (HS) 的名称及含量水平方面的信息。 有害/有毒物质/元素 成分名称 铅 (PB) 印刷电路板 电阻器 电容器 铁氧体磁环 继电器/光学部件 二极管/晶体管 振荡器和晶振 调节器 电压传感器... -
Page 22: Appendix B - Warranty And Repairs Policy
Multi-Tech Warranty Statement Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of purchase is not provided, two, five, or ten years (depending on model) from date of shipment. -
Page 23: Repair Procedures For International Distributors
Replacement Parts SupplyNet, Inc. can supply you with replacement power supplies, cables, and connectors for selected Multi-Tech products. You can place an order with SupplyNet via mail, phone, fax, or the Internet at the following addresses: Mail: SupplyNet, Inc. -
Page 24: Index
Fused DC power cable...11 General Safety ...4 Handling Precaution...4 Installation ...9 LED Indicators...8 Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370B) Index Maintenance of the Adapter... 5 Master Discovery/Connection Sequence ... 13 Ordering Replacement Parts ... 23 Package Contents... 5 Pin Assignments ...