Download Print this page

Coleman 2000000437 Install Manual

The coleman company tent

Advertisement

Quick Links

Before you begin
Read all instructions before set up.
• Select a level campsite clear of rocks, branches, and other hard
or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees.
• For best results in windy conditions, position end of tent into
the wind.
• Enlist the help of at least one other person to assist you when
it is time to assemble the tent.
To Set Up Tent
1. Unfold tent and spread out on a
clean, level surface with the doors
facing the desired direction. (Fig. 1)
2. Stretch corners of tent until floor is
taut then hammer stakes through
loops on web straps to secure.
(Fig. 1A )
3. Assemble two red main poles and
two silver cross poles by interlocking
the shock-corded poles.
4. Insert red main poles through
sleeves with red trim in top of tent
forming an "X" as shown. (Fig. 1)
5. Insert silver cross poles through
sleeves with silver trim in top of tent.
NOTE: Make sure the silver
poles pass through the cutouts in the
red trimmed sleeves and under the
red main poles. (Fig. 1 & 1B)
6. Insert one end of red main pole
into first grommet in web straps
at front corner of tent.
(Fig. 2 & 2A)
7. Go to opposite end of red main
pole and gradually apply pressure
to the pole forming an arch.
Insert the end of pole into first
grommet at the back corner of
tent. (Fig. 2 & 2A)
8. Repeat for second red main pole.
9. Insert one end of silver cross
pole into grommet in web strap
at side of tent. (Fig. 2 & 2B)
10. Go to opposite end of silver
cross pole and gradually apply
pressure to the pole forming an
arch. Insert the end of pole into
the grommet at other side of
tent. (Fig. 2)
11. Repeat for second silver cross
pole forming an "X". (Fig.2)
12. Attach frame clips along edges of tent to red and silver poles. (Fig. 2 & 2B)
13. Clip plastic hooks, located on both sides of tent, to secure silver cross poles together as shown. (Fig. 2 & 2C)
14. Stretch sides of tent until floor is taut then hammer stakes through loops on web straps to secure.
Red Trim on Sleeve
Red, Shock-corded
Main Poles
2B
Stake through
2C
loop
(continued on other side)
TM
HELIOS
X
MODEL 2000000437
Parts and Components
Description
Main Poles, Red (2)
Cross Poles, Silver (2)
Vestibule Poles, Gold (2)
Rainfly, Orange
Door
Silver Trim on Sleeve
Silver, Shock-corded
Cross Poles
Stake through
loop
3
Part Number
5010000521
5010000523
5010000522
5010000525
Fig. 1
1B
Cutout in Red Sleeve
Silver
Cross Pole
Door
1A
Door
Red Main
Pole in first
Fig. 2
grommet
2A

Advertisement

loading

Summary of Contents for Coleman 2000000437

  • Page 1 13. Clip plastic hooks, located on both sides of tent, to secure silver cross poles together as shown. (Fig. 2 & 2C) 14. Stretch sides of tent until floor is taut then hammer stakes through loops on web straps to secure. HELIOS MODEL 2000000437 Parts and Components Red Trim on Sleeve...
  • Page 2 This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The applica- tion of any foreign substance to the tent fabric may render the flame-resistant properties ineffective. The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, Kansas 67219 Coleman 1-800-835-3278 •...

This manual is also suitable for:

Helios x3 2000000437