Projector + Personal Computer - Mitsubishi Electric XD300U User Manual

Projector + Personal computer

VIDEO 1
S-VIDEO
MAIN
AC IN
VIDEO
AUDIO
to COMPUTER
AUDIO IN
Important:
• When you use a long RGB cable instead of the cable provided, the picture quality may deteriorate.
• Connectors or analog RGB output adapters may be necessary depending on the PC connected to this projector.
Please contact your dealer.
• The audio input for this projector is a stereo pin jack. (Speaker output is mono.) Please check the available
cable for the audio input terminal of the PC. Some personal computer may not have the audio output terminal.
For using Macintosh
• A monitor output adapter is necessary for a Macintosh if it has no video port. Please contact your dealer.
• A MAC adapter for RGB cable may be necessary depending on the personal computer connected to this projec-
tor. Please contact your dealer.
About DDC™
The COMPUTER 1 IN terminal of this projector complies with the DDC1/2B standard.
When a computer supporting this standard is connected to this terminal, the computer will automatically load
the information from this projector and prepare for output of appropriate images.
• After connecting a computer supporting this standard to this terminal, turn on the projector's main power
switch first, and then boot up the computer.
• You may need to install the DDC driver, depending on the computer you use. In this case, you need to
download the driver from our Web site. Contact your dealer or Mitsubishi sales office for further information.
to COMPUTER (1or2) IN
MOUSE /RS-232C
VIDEO 2
COMPUTER 1 IN
IN IN
AUDIO OUT
COMPUTER 2 / COMPONENT IN COMPUTER OUT
COMPUTER
AUDIO IN
When outputting to both a
PC monitor and the projector.
Audio cable (option)
RGB cable for PC
computer
to COMPUTER
OUT
RGB cable for PC (option)
to monitor port
AUDIO OUT
MONITOR OUTPUT
to PC audio
output
EN – 11