Microtek ScanMaker 8700 Pro Quick Start

How to Install Your Scanner Transparency Accessories
How to install the various scanner
transparency accessories that come
with dual-bed scanners featuring
the E.D.I.T technology.
Before proceeding any further with
installation or use, check first to
see that your package includes the
following.
8" x 10" Glass Film
Holder
Main Staging Template
6 x 9 cm Film Template
35mm Mounted Slide
Template
35mm Filmstrip
4" x 5" Film Template
Template
There are two ways to scan
transparent film.
• By using the 8" x 10" Glass Film
Holder, which is used to scan
non-standard-sized transparent
film.
• By using the Main Staging
Template, which is used
together with the individual
templates to scan a particular
type of standard-sized
transparent film, such as
individual 35mm slides, 35mm
filmstrips, 6 x 9 cm film, or
4" x 5" film.
Copyright © 2000 Microtek International Inc.
Using the 8" x 10" Glass
Film Holder
1. Place the film on top of the
Glass Film Holder.
2. Place the vinyl strip on the edges
outside the film to secure the
film to the holder.
3. Place the Glass Film Holder into
the transparency tray of the
scanner.
http://www.microtek.com
Using the 35mm Mounted
Slide Template
1. Insert the individual 35mm
slides to be scanned into the
35mm Mounted Slide Template.
2. Place the 35mm Mounted Slide
Template in the Main Staging
Template, then put this
assembly in the transparency
tray of the scanner.
I49-002882A, June 2000