Image Statistics; Draw Profile - Meade Autostar Software Manual

This dialog show the result of your magnitude determination. Not only is the magnitude displayed, but the
error of the measurement and other pertenant information is displayed. If Auto Log Magnitudes is not
set, you can still write the results to the log file by clicking on the Log button.

Image Statistics

The Image Statistics function is similar to the magnitude functions except that it displays only the the
statistical information about the selected region. Additionally, Image statistics are calculate over the whole
selected region, not just within the photometric aperture. An example result dialog is show below:
Click OK to dismiss the dialog. Click on Log to write these values to the log file.

Draw Profile

The selection box determines the values to be included in the profile dialog. When Draw Profile is
selected a Profile dialog similar to the one below is displayed.
-30-
Autostar IP