McCall PTA-1 Specifications

PTS-2
PTA-2D
McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com
Top - One piece, heavy duty, S/S top and refrigerated
patented rail. Front edge of top to have stylized nosing
extending over the door hardware. The elevated pan rail
is a separate easy to clean coved corner insulated S/S
refrigerated compartment capable of accommodating up
to 6" deep inserts. The pan compartment is refrigerated
with a dual - cool system employing a series of
serpentine broad contact refrigeration cooling coils
bonded behind and to S/S interior walls and bottom for
maximum transfer and "cold wall" hold-over efficiency.
Note: Pans are not furnished.
Cabinet - All metal, welded construction. Exterior front,
ends, doors and machine compartment cover are S/S.
Exterior bottom and rear, zinc coated steel unless
otherwise specified. Heavy duty casters.
Door Opening - Safety-beveled, vinyl breakers, foamed-
in-place with no exposed fasteners. intersections to have
matching, closed, fitted corners. Perimeter of opening
provided with concealed, minimum-wattage, dew-
point compensators.
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
D
P
IZZA
Models: PTS-1, PTS-2, PTS-2D*,
PTS-3, PTS-3D*
Interior: Sides and back stainless steel
Door liner and blower mullion: Aluminum
Exterior: All stainless steel except for galvanized bottom and back
PTA-1, PTA-2, PTA-2D*,
PTA-3, PTA-3D*
Interior: All aluminum
Exterior: All stainless steel except for galvanized bottom and back

Standard Features

• 6" casters
• Epoxy coated shelves
• Dual cool system with cold wall rail
• Self-closing door(s)
• R-404A refrigerant
• NON-CFC Foam insulation cabinet & rail
• Pan Rail "constant pressure refrigerant" design will
never freeze your product
• Heavy duty anodized aluminum door handles
• All units meet NSF standard 7 requirements
• Lid has stay open feature at 45
* Denotes drawers available
* Cutting board, drawers and garnish rack are options.
CLASSIFIED TO
NSF (STD-7-1999)

SPECIFICATIONS

Doors - Self-closing with built-in dwell when open 100°
and positive safety stops at 120°. Welded construction
with S/S exterior fronts. Heavy-duty, chromed plated
hinges. Door furnished with flush cylinder locks,
keyed alike.
Door Gasket - One-piece, self-adjusting, self-seating,
vinyl magnetic gasket keyed into a foamed-in-place
thermal breaker. Snap in design is easily removed
without tools.
Thermometer - Vertical, interior thermometer
furnished standard.
Condensate Evaporator - Sanitary, removable, automatic
electrical evaporator mounted in machine compartment
for easy access. No plumbing connections or floor
drains required.
Rail Evaporator Coil- Serpentine coils have factory set
pressure control and expansion valve to maintain cold
wall temperature above freezing.
McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
January 2007 / Printed in U.S.A.
ITEM #
MODEL #
PROJECT NAME
C
UAL OOL
P T
REP ABLES
0
Approval :
Bottom Evaporator Coil - Two & three door models
equipped with vertical forced-air, high humidity
evaporator coil located behind center door mullion for
maximum circulation without loss of usable interior
space. One evaporator in two-door cabinets, two
evaporators in three-door cabinets. One door model
has ceiling mounted evaporator.
Refrigeration System - Hermetic system with
R-404a refrigerant expansion valves, automatic
adjustable thermostat system designed to maintain
a 38°F average internal air temperature.
Casters - Heavy duty 6" load height swivel casters
are standard.
Condensing Unit - (Self-contained models) Air
cooled, hermetic condensing unit installed in machine
compartment on slide out tracks for ease of cleaning
and maintenance.
Shelves & Pan Racks - One adjustable, removable, epoxy
coated shelf per section. Pan racks are optional.
SIS #
0 0
, 60 and 90
AIA #