McCall L1-1002 Specifications

L1-1002H
McCall Refrigeration specification sheets are available
online @ www.mccallrefrigeration.com
Cabinet - Cabinets are all metal, inside and out. The
exterior top, back, and bottom are made of galvanized
steel, floor and ramp are stainless steel. In addition, all
seams are closed and sealed, with metal edges turned
away from the exposed surface. The result is an
integrated structural frame. Internal corners are coved to
conform to NSF standards. Automatic interior lighting is
controlled by a light switch concealed in the door hinge.
Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com
R -I H
OLL N EATED
( 65" 72"
AND
SPECIFICATIONS
Doors - Constructed of metal, cabinet doors are self-
closing and fully insulated. Their cam-lift hinges are
chrome-plated and self-lubricating. Hinges also have
a safety stop that holds the door open, preventing
overswing. Chrome-plated pull handles have built-in
cylinder locks. The magnetic vinyl gaskets are
removable without the use of tools. The bottoms of all
door openings are supplied with full width sweeper
gaskets. Doors easily lift off and door openings are
protected by a stainless steel breaker strip.
McCall Refrigeration / 81 West Holly Street / Parsons, TN 38363
January 2007 / Printed in U.S.A.
ITEM #
MODEL #
PROJECT NAME
H
OLDING
) 2
CART CAPACITY
Cabinet Interior/Exterior Specifications
1000 Series - Stainless interior and exterior.
2000 Series - Stainless steel exterior and aluminum interior.
4000 Series - Anodized aluminum exterior/stainless steel front and
mill finish aluminum interior.

Standard Features

• Electronic temperature controlled
• Automatic interior light
• Self-closing cam-lift hinges
• Stainless steel breaker strips
• Interior corners coved to NSF standards
• Magnetic door gasket
• Chrome-plate door handles with security locks
• NON-CFC foam insulation
• Removable stainless steel ramp, each door opening
• Adjustable doorstops at 90˚ and 180˚
Approval :
Insulation - Cabinet body, doors, and evaporator
coil housings are filled with pressure-injected
polyurethane foam.
Heating System - The heating systems employs an
electrical resistance heater, a microprocessor based
control and an interior duct for air distribution. The
entire system is sized and balanced to maintain
temperatures between 140˚ and 170˚ F.
AIA #
SIS #
C
ABINETS
SECTION