Makita AN451 Instruction Manual page 19

MAKITA LIMED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the period of ONE YEAR from the date of
original purchase. Should any trouble develop during this o n e - y a period, return the COMPLETE
tool, freight prepaid, to one of Makita's Factory o r Authorized
Service
Centers. If inspection shows
the trouble is caused by defective workmanship or material, Makita will repair (or at our option,
replace) without charge.
This Warranty does not apply where:
repain have been made
or
attempted by others:
repain are required because of normal wear and tear:
The tool has been abused, misused or improperly maintained;
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT INCIDENTAL OR CON-
APPLIES BOTH DURING AND AFTER THE TERM OF THIS WARRANTY.
SEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE
PROD^.
THIS DISCLAIMER
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF "MERCHANTABILITY" AND "FITNESS FOR A SPECIFIC PURPOSE,"
AFTER THE ONE-YEAR TERM O F THIS WARRANTY.
This Warranty gives you specific legal rights, and you may
also
have other rights which vary from
state to state. Some states do not allow the exclusion
or
limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts,
s o
the above Limitation may not apply to you.
M aki ta Corporation
3-11 -8,
Sumiyoshi-cho,
Anjo, Aichi 446 Japan