Download Print this page

Makita AN451 Instruction Manual page 16

Pneumatic roofing coil nailer
Hide thumbs Also See for AN451:

Advertisement

Maintenance of nailer
Always check the
tool
for its overall condition and
loose screws before operation. Tighten
as
required.
Make sure all safety mechanisms are in working order
before operation. The tool must not operate if only
the trigger is pulled or if only the contact element i s
pressed against the wood. It must work only when
both actions are performed. Test for possible faulty
operation with nails unloaded.
..::
,
:.
'
,
. . .
:.
.* .
_.:
..
.
...
.,
.
I
/ / / / / / / / / /
/A"mm
When the tool is not to be used for an extended period
of time, lubricate the tool using pneumatic tool oil and
store the tool in
a safe
place. Avoid exposure t o direct
sunlight and/or a humid or hot environment.
I

Advertisement

loading