Advertisement
Quick Links
Warranty Information..
MTX products purchased in the United States from an authorized MTX dealer, is guaranteed against de-
fects in material and workmanship for a period of TEN YEARS from the date purchased by the end user,
and limited to the original retail purchaser of the product. Product found to be defective during that period
will be repaired or replaced by MTX at no charge. This warranty is void if it is determined that unauthorized
parties have attempted repairs or alterations of any nature. Warranty does not extend to cosmetics or fin-
ish. Before presuming a defect is present in the product, be certain tht all related equipment and wiring is
functioning properly. MTX disclaims any liabilty for other incurred damages resulting from product defects.
Any expenses incurred in the removal and reinstallation of product is not covered by this warranty. MTX's
total liability will not exceed the purchase price of the product. If a defect is present, your authorized MTX
dealer may be able effect repairs.
Proof of purchase is required when requesting service, so please retain your sales receipt and take a mo-
ment to register your product on line at mtx.com. Also, a Return Authorization number (RA) is required
before shipping product back to MTX, call 800-556-2888 or 608-328-5560.
1 Mitek Plaza
Winslow, IL 61089
815-367-3000
800-225-5689
www.mtx.com
MTX Contractor Distributed Series
21A8792
In-Walls and In-Ceilings
Advertisement
Related Manuals for MTX CD520C
Summary of Contents for MTX CD520C
- Page 1 Product found to be defective during that period will be repaired or replaced by MTX at no charge. This warranty is void if it is determined that unauthorized parties have attempted repairs or alterations of any nature. Warranty does not extend to cosmetics or fin- ish.
-
Page 2: Loudspeaker Placement
Spray or roller application should provide excellent results. A paint shield is included with all MTX speakers to protect the drivers during the painting process. The cloth inserts in the grilles should be removed before the speakers are painted. They should be placed back in the grilles after the paint is dry. - Page 3 Dispersion After Tweeter Adjustment Figure 3 Figure 4 shows an example of speaker placement in the listening room when using a complete set of MTX Contractor Distributed Series In-Wall and In-Ceiling models in a home theater system. In this example, in-wall models are used for the Front Left and Right and Center channels, and in-ceiling models are used for the Left and Right Rear surround channels.
-
Page 4: Caractéristiques
The following models can be installed in wall and ceiling material all the way down to 0” thick: CD520W and CD620W. The following models can be installed in wall and ceiling material down to 1/8” minimum: CD520C, CD620C, CD622C, CD820C and CD822C. - Page 5 Todos los modelos de altavoces empotrados en la pared y el cielo raso Contractor Distributed de la serie MTX empotrados en la pared y en el cielo raso que se mencionan en este folleto se montan en paredes y cielos rasos de hasta 1 plg. de grosor con las aletas de montaje en posición normal de fábrica. Si el grosor de la pared o del cielo raso es más de 1 plg., las aletas de montaje se deben invertir en los rieles...
-
Page 6: Ubicación De Los Altavoces
Contractor Distributed de MTX en un sistema de cine en casa. En este ejemplo, los modelos empotrados en la pared se usan para los canales frontales izquierdo y derecho, y los modelos empotrados en el cielo raso se utilizan para los canales surround traseros izquierdo y derecho.