MS-6741 Micro-ATX Mainboard
Floopy Disk Controller
This is used to enable or disable the onboard Floppy controller.
Option
Description
Auto
BIOS will automatically determine whether to enable the onboard
Floppy controller or not.
Enabled
Enables the onboard Floppy controller.
Disabled
Disables the onboard Floppy controller.
Serial Port 1
This item specifies the base I/O port addresses of the onboard Serial Port 1 (COM A).
Selecting Auto allows AMIBIOS to automatically determine the correct base I/O port
address. Settings: Auto, 3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and
Disabled.
Parallel Port
This field specifies the base I/O port address of the onboard parallel port. Selecting
Auto allows AMIBIOS to automatically determine the correct base I/O port address.
Settings: Auto, 378, 278, 3BC, Disabled.
Port Mode
This item selects the operation mode for the onboard parallel port: ECP, Normal, Bi-
Dir or EPP.
EPP Version
The item selects the EPP version used by the parallel port if the port is set to EPP
mode. Settings: 1.7, 1.9.
3-18
Integrated Peripherals