Lorex ACC-HDB User Manual

INTRODUCTION:
Congratulations on purchasing the External IDE HDD Bay. This external hard drive bay facilitates recording to
a Slave HDD from a DVR system with an IDE Sub input. The system has a 12V DC power supply, power
switch, a 40 pin cable interface input and a removable cartridge casing to easily install or remove your hard
disk drive.
This external hard drive bay, when equipped with a correctly set hard disk drive, can be used as a slave back-
up drive for a DVR system when the master drive is full.
To learn more about this External IDE HDD Bay and other HDD units, please visit our website at:
CAUTIONS:
1. All the warnings and instructions of this manual should be followed
2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use water
damped cloth for cleaning
3. Do not use this unit in very humid and wet places
4. Keep enough space around the unit for ventilation. Slots and openings of the cabinet should not be
blocked.
5. During flashes of lightning or cracks of thunder, or when the system is not used for a long time, unplug
the system power supply and disconnect the antenna and cables to protect the unit from lightening or
power surges.
FEATURES:
• Easily connects to any DVR or DVR combo unit with a 40 pin IDE Sub input
• Comes with its own power supply for easy connection to your DVR
• 2 keys to lock cartridge
• Supports 20 to 250 GB HDD
THIS PACKAGE CONTAINS:
1 - HDD (Hard Disk Drive) Bay
1 - 12V DC Power supply
1 - 2 keys for cartridge
1 - 40 pin interface cable
1 - Owner's Manual
www.strategicvista.com
MODEL: ACC-HDB / ACC-HDB80
EXTERNAL IDE HDD BAY
NOTE::
Model ACC-HDB does not
include a HDD
Model ACC-HDB80
includes a 80 GB HDD