Troubleshooting - Lorex L154-81 Instruction Manual

TROUBLESHOOTING:

When a malfunction occurs, it may not be serious and can be corrected easily. The
following table describes the most common problems and solutions. Please read this table
thoroughly before calling your DVR dealer.
PROBLEM
No power
Not responding when any of the
buttons are pushed
No recorded video
Schedule Record enable
does not work
No live video
HDD not found
Recording stopped
• Check power cord connections.
• Confirm that there is power at the outlet.
• Check if it is under Key Lock mode.
•
Press any key, and enter the default password 111111 or the current password.
• Check if the HDD is installed properly.
• Check if the Schedule Enable is set to YES.
• Check camera video cable and connections.
• Check monitor video cable and connections.
• Confirm that the camera has power.
• Check camera lens setting.
Re-insert HDD as per Appendix #1.
Make sure that the HDD cartridge is locked.
Check the jumper setting, it must be set to MASTER.
The HDD is full, and overwrite is not enabled.
SOLUTION
-23-