Sign in today to find solutions:

Don't have an account? Sign up

   
7. ADVANCED
Menu settings such as changing & enabling
the master and user password, loading the
default settings, overwriting the HDD and
clearing the Master and Slave HDD can
be done.
The default MASTER password (Password
Input (6): _ _ _ _ _ _ ) for the DVR is 111111,
and should be entered to get into the
Advanced Menu. After entering the
correct password, the monitor will
display the words, "Password Correct"
Note: If all master and user passwords are
disabled, this menu will not display
again.
Advanced Menu
(i) CHANGE MASTER PASSWORD: To
change the master password you will
need to enter the "Current Password", the
"New Password", and the confirmation of
the password. The default master
password is 111111. When you have
entered the current password and you are
ready to enter the new password and
confirmation password do not press the
UP or Down arrow keys to move down,
since the DVR will take this as a character
(ii) CHANGE USER PASSWORD: To
change the user password you will
need to enter the "Current Password", the
"New Password", and the confirmation of
the password. The default user
password is 222222.
When you have entered the current password and you are ready to enter the new
password and confirmation password do not press the UP or Down arrow keys to
move down, since the DVR will take this as a character
(iii) MASTER PASSWORD ENABLE:
Press the select button to enable (ON) or disable (OFF)
(iv) USER PASSWORD ENABLE:
Press the select button to enable (ON) or disable (OFF)
(v) DEFAULT SETTING: If this is selected then the DVR will load all the original default
settings, such as schedule, sensor/alarm, etc. You will be asked whether you'd like to
load the default (YES) or (NO)
(vi) OVERWRITE ENABLED: When enabled (YES), recording will continue uninterrupted
when the HDD is full. The previous recording will be Overwritten in a "first in, first out"
basis. When disabled (NO), recording will stop when the HDD fills up. It will then need to
be cleared in order for recording to continue.
PASSWORD INPUT(6): _ _ _ _ _ _
ADVANCED MENU
CHANGE MASTER PASSWORD
CHANGE USER PASSWORD
MASTER PASSWORD ENABLE
USER PASSWORD ENABLE
DEFAULT SETTING
OVERWRITE ENABLED
MASTER HDD CLEAR
SLAVE HDD CLEAR
LOAD DEFAULT Y/N?
PRESS (
PRESS (MENU) TO EXIT
OFF
OFF
[YES]
N/A
), THEN (SELECT)
-12-
Next page -> <- Previous page

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: