Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

Lorex SG7518 Specifications Page 2

Lorex sg7518: specifications.

 
FEATURES
• Color Indoor / Outdoor Camera
• 1/4" CCD Color Image Sensor
• Listen-in way Audio
• Compatible with all Lorex, Sylvania and Sentinel CCTV
Observation Systems
• 6mm angle lens
• Infra-red illuminators ideal for low light viewing (B&W
video in low-light
CAMERA INSTALLATION
1) Attach the Camera to the Metal Bracket and tighten
the swivel.
2) Connect the supplied extension cable to the back of the
camera.
3) Attach the metal stand to the wall or ceiling where
you want to install the camera. Locate a wall stud
or ceiling joist and secure bracket using the supplied
screws.
4) Connect the other end of the cable to the back of the
monitor.
TROUBLE SHOOTING
PROBLEM
No Picture
Picture Flickering
Keep camera installed away from direct sunlight.
Also avoid places where humidity is high or
NOTE
unable to protect rain. The mounting bracket must
be attached to a structural device such as wall stud
or ceiling rafter using suitable fastener.
Technical Specifications:
• Image Device:
• Picture Elements:
• Lens:
• Resolution:
• Illumination:
• Power Requirement:
• Operating Temperature:
• Dimensions:
• Weight:
Because our products are subject to continuous improvement, SVII
and it's subsidiaries reserve the right to modify product Design and
Specifications without notice and without incurring any obligation.
E & OE.
For more information, please visit our website at
www.lorexcctv.com
REMEDY
Check the cable for any loose
connection
Make sure the camera is not facing
Any direct Light or Sunlight
1/4" CCD Sensor
510 H x 492 V
6 mm
350 TV Lines
0 LUX @ F2.0
powered from monitor via cable
-14°F - 122°F (-20ºC to 50ºC)
2.1"(W) x 3.2"(D) x 2"(H)
12 oz

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: