10/100 workgroup switches instant etherfast series (15 pages)
Summary of Contents for Linksys SVIEW04
Page 1
ProConnect ® Series ProConnect ® 4-Station CPU Switch Use this Guide to install: SVIEW04 ver. 2 User Guide...
Page 2
Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individ- ual or entity.
The ProConnect command over multiple desktop or notebook PCs - all from a single keyboard, mouse, and monitor! Switch between PCs with the press of a key, or use the cycling feature to switch automatically at pre-selected time intervals. Got a notebook PC? Plug it into the switch and control it from your desktop PC’s full-...
One User Guide and Registration Card NOTE: For PCs that use standard PS2 connections, you can purchase a Linksys Cabling Kit, model #SVPS06, from your Linksys retailer. Computers that use an AT-style keyboard socket or a 9-pin serial port will require an additional adapter.
CPU Port of the CPU Switch being used as the primary unit. CPU ports Connect the cables that link the computers here. Linksys cable kits can be purchased at your nearest Linksys deal- ProConnect ® Series...
2. Connect the monitor, keyboard, and mouse ports of your PC(s) to one of the 4-Station CPU Switch’s CPU ports with a Cabling Kit. 3. Plug the Power Adapter into the 4-Station CPU Switch’s power port, then plug the Power Adapter into a power source.
Hot Plugging CPU Ports CPU port cables can be unplugged if necessary without powering down the switch. If you reconnect the Cabling Kit (available from your nearest Linksys dealer) to the same port on the switch, the switch will immediately recognize the PC.
If it becomes necessary to power down an 4-Station CPU Switch, you must per- form the following prior to starting it back up: 1. Shut down all the PCs that are attached to the 4-Station CPU Switch, along with all other switches and PCs connected.
Page 9
Last/Next Mode: Quick Mode and Basic Mode. A method can be selected by using DIP Switch 4 on the rear panel of the First Stage unit. To enable Quick Mode, set the DIP Switch ON. To enable Basic DIP Switch 2 Mode, set the DIP Switch OFF.
® 4-Station CPU Maximum Resolution LEDs The SVPS06 Cabling kit for connecting PCs to the CPU switch is sold sepa- rately. If you have any questions about cabling kits, please contact Linksys for assistance. SVIEW04 ver. 2 Direct: 4 Max:...
FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDEN- TAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCU- MENTATION.
Contact Information For help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Internet addresses below. Sales Information 800-546-5797 (LINKSYS) Tech Support 800-326-7114 RMA Issues 949-261-1288 949-261-8868 Email support@linksys.com http://www.linksys.com FTP Site ftp.linksys.com...