Sending Faxes - Lexmark Pro700 Series User Manual

Sending faxes

ADF
Use the ADF for multiple-page documents.
Note: The ADF is available only on select models. If you
purchased a printer without an ADF, load original documents
or photos on the scanner glass.
Tips for sending faxes
Before you send a fax:
• Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if you
hear a dial tone.
•
Load an original document faceup into the ADF or facedown on the scanner glass.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
• When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.
Sending faxes using the printer control panel
1
From the printer control panel, press
2
Enter a fax number, or press Address Book to select a number from the Speed Dial or Group Dial list.
3
If you want to send a fax to a single recipient, then press
If you want to send a fax to a group of numbers (broadcast fax):
a
Press the right arrow button.
b
Enter another number, and then press
Repeat steps a through b to add more numbers.
4
Press the Color/Black button to select a color or black-and-white fax.
5
Press to start the fax job.
Warning—Potential Damage: Do not touch the cables or the
Scanner glass
Use the scanner glass for single pages, small items (such as
postcards or photos), transparencies, photo paper, or thin
media (such as magazine clippings).
.
.
.
and
Faxing
87
ports while actively sending a fax.