Changing Temporary Settings Into New Default Settings - Lexmark Pro700 Series User Manual

To enable Eco-Mode, press the 2-Sided/Eco-Mode button until the light near "Eco-Mode" comes on.

Changing temporary settings into new default settings

The following menus revert to default settings after two minutes of inactivity or after the printer is turned off:
Copy menu
Scan menu
Fax menu (selected models
only)
Photo menu
To change the temporary settings into new default settings
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Defaults, and then press
3
Press the up or down arrow button to scroll to Set Defaults, and then press
Use Current appears on the display.
4
Press again to select Use Current.
To disable the settings timeout feature
You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Device Setup, and then press
• Copies
•
Quality
• Resize
•
Lighter/Darker
• Collate
•
Photo Reprint
• Pages per Sheet
•
Original Size
•
Copies per Sheet
• Content Type
•
Quality
•
Original Size
• Lighter/Darker
•
Quality
The following Photo options will not time out after two minutes of inactivity or after you
turn off the printer, but they will return to the factory default settings when a memory card
or flash drive is removed.
•
Layout
• Colorized Effect
•
Photo Size
• Quality
.
.
Using the printer control panel buttons and menus
17
.
.
.